dda6e4c787
打通逆向物流的全部后端入口。 新增接口（app/api/v1/inbound/stock.py）： - POST /stock/<id>/change-status 库存状态变更（在库/冻结/不良品） - POST /stock/return-from-outbound 通用原单退回 - POST /stock/defective/<id>/restock 不良品修好回库（支持部分回库） - POST /stock/defective/<id>/scrap 不良品报废销毁 - GET /stock/defective 在管台账分页查询 设计要点： - 良品退回加回原库存行；不良品退回则库存表分毫不动，只写独立在管台账。 这样坏件从根上不会混进可分配池 - 全链路 Fail-Closed 守卫：良品退回到非「在库」行会被拒（status 是行级 属性，加回已冻结/不良品的行会让良品被连带隔离）；原库存行已不存在会被 拒（入库模块会物理删除库存行，实测 1077 条出库记录中已有 7 条悬空） - 三个写接口均加 with_for_update 行锁 + prevent_double_submit 幂等锁。 装饰器顺序为 permission_required → prevent_double_submit，顺序颠倒会因 JWT 未验证而抛错、被自身 except 捕获后 fail-open 降级 - 报废同时写 trans_scrap 台账（source_table 用 trans_defective_goods 并 存台账自身主键，与 trans_borrow/trans_repair 作来源时的约定一致）， 成本按原库存行 best-effort 取价，取不到记 0 而不中断报废 报废报表集成（app/api/v1/scrap.py）： - _resolve_materials 补 trans_defective_goods 分支。物料名已在台账冗余存储， 不联表——坏件的原库存行可能已被删除，联表取名称会得到空值 - 公司隔离补 defective_subq 分支。原先按 source_table 逐个构造子查询， 未知来源会被整体过滤，导致这类记录对普通用户静默消失 - 无审批单号的分组前缀按来源分流：不良品直报不再套用 LEGACY-（它是新业务 记录，不是历史脏数据）。分组键同步带上来源标记，且 _order_key_pred 的 SQL 谓词改为同口径，否则页面分组与「按单筛选」结果会对不上
3149 lines
138 KiB
Python
3149 lines
138 KiB
Python
from flask import Blueprint, jsonify, request, send_file, current_app
|
||
from app.extensions import db, beijing_time
|
||
from datetime import datetime, timedelta
|
||
from flask_jwt_extended import jwt_required, get_jwt, get_jwt_identity
|
||
from app.utils.decorators import permission_required, get_current_company_filter, prevent_double_submit
|
||
from sqlalchemy.orm import joinedload
|
||
import uuid as uuid_module
|
||
import io
|
||
import traceback
|
||
from openpyxl import Workbook
|
||
from openpyxl.styles import Font, Alignment, Border, Side, PatternFill
|
||
|
||
# 导入模型
|
||
from app.models.inbound.buy import StockBuy
|
||
from app.models.inbound.stocktake import (
|
||
StocktakeDraft,
|
||
StocktakeSession,
|
||
STOCKTAKE_MODE_OPEN,
|
||
STOCKTAKE_MODE_BLIND,
|
||
STOCKTAKE_SCOPE_FULL,
|
||
STOCKTAKE_SCOPE_ACTIVE,
|
||
STOCKTAKE_STATUS_ACTIVE,
|
||
STOCKTAKE_STATUS_FINISHED,
|
||
)
|
||
from app.models.transaction import (
|
||
TransBorrow,
|
||
TransReturn,
|
||
TransScrap,
|
||
TransDefectiveGoods,
|
||
RETURN_TYPE_GOOD,
|
||
RETURN_TYPE_DEFECTIVE,
|
||
DEFECTIVE_STATUS_PENDING,
|
||
DEFECTIVE_STATUS_IN_PROGRESS,
|
||
RESTOCKABLE_DEFECTIVE_STATUSES,
|
||
SCRAPPABLE_DEFECTIVE_STATUSES,
|
||
VALID_DEFECTIVE_STATUSES,
|
||
defective_close_status,
|
||
)
|
||
from app.models.outbound import TransOutbound
|
||
from app.models.base import MaterialBase
|
||
|
||
# 库存状态语义的单一事实来源（与分配器共用同一套常量，避免两处定义漂移）
|
||
from app.services.inventory_reservation import (
|
||
VALID_STOCK_STATUSES,
|
||
STOCK_STATUS_IN_STOCK,
|
||
)
|
||
|
||
# 尝试导入用户模型
|
||
try:
|
||
from app.models.system import SysUser
|
||
except ImportError:
|
||
SysUser = None
|
||
|
||
# 尝试导入半成品和成品
|
||
import logging
|
||
|
||
try:
|
||
from app.models.inbound.semi import StockSemi
|
||
except Exception as e:
|
||
logging.error(f"❌ 致命错误：StockSemi 模型导入失败: {e}")
|
||
StockSemi = None
|
||
|
||
try:
|
||
from app.models.inbound.product import StockProduct
|
||
except Exception as e:
|
||
logging.error(f"❌ 致命错误：StockProduct 模型导入失败: {e}")
|
||
StockProduct = None
|
||
|
||
|
||
def _normalize_user_id(user_id=None):
|
||
"""规范化 user_id，确保是有效字符串"""
|
||
# 优先使用传入的 user_id，否则从 JWT 获取
|
||
if user_id and isinstance(user_id, str) and len(user_id) <= 100:
|
||
return user_id.strip()
|
||
# 从 JWT 获取当前用户
|
||
try:
|
||
return get_jwt().get('display_name') or get_jwt_identity()
|
||
except:
|
||
return 'unknown'
|
||
|
||
|
||
def _resolve_user_name(user_id):
|
||
"""把 user_id 解析为真实姓名，解析不出来就原样返回。
|
||
|
||
需要兼容三种来源：
|
||
1. "孙霞(sunxia)" —— 草稿/流水里实际存的格式，来自 JWT 的 display_name
|
||
2. "张三/zhangsan01" —— SysUser.username 的存储格式
|
||
3. 纯数字用户ID —— 直接按主键查
|
||
"""
|
||
if not user_id:
|
||
return '-'
|
||
raw = str(user_id).strip()
|
||
|
||
# 1. "姓名(账号)" / "姓名/账号" —— 分隔符前就是姓名，无需查库
|
||
if '(' in raw and raw.endswith(')'):
|
||
name = raw.split('(', 1)[0].strip()
|
||
if name:
|
||
return name
|
||
if '/' in raw:
|
||
name = raw.split('/', 1)[0].strip()
|
||
if name:
|
||
return name
|
||
|
||
if not SysUser:
|
||
return raw
|
||
try:
|
||
user = None
|
||
# 尝试通过ID或用户名查找
|
||
if raw.isdigit():
|
||
user = SysUser.query.get(int(raw))
|
||
if not user:
|
||
user = SysUser.query.filter(SysUser.username.like(f"%/{raw}")).first()
|
||
# 注意：此处不做 filter_by(username=...) 兜底，
|
||
# 避免 PostgreSQL 把 user_id 数字与 username 字符串列做类型比较导致报错
|
||
|
||
if not user:
|
||
return raw
|
||
|
||
# 2. 解析 username 格式: "张三/zhangsan01" -> 取前面的真实姓名
|
||
raw_username = getattr(user, 'username', None) or raw
|
||
if '/' in raw_username:
|
||
return raw_username.split('/')[0]
|
||
return raw_username
|
||
except Exception:
|
||
return raw
|
||
|
||
|
||
def get_stock_model(source_table):
|
||
"""根据source_table获取对应的库存模型"""
|
||
if source_table == 'stock_buy':
|
||
return StockBuy
|
||
elif source_table == 'stock_semi':
|
||
return StockSemi
|
||
elif source_table == 'stock_product':
|
||
return StockProduct
|
||
return None
|
||
|
||
from app.services.print.network_print_service import NetworkPrintService
|
||
|
||
bp = Blueprint('stock_ops', __name__)
|
||
|
||
|
||
# ============================================================
|
||
# 辅助函数：获取库存记录
|
||
# ============================================================
|
||
def get_stock_record(source_table, stock_id, for_update=False):
|
||
"""根据库存类型和ID获取库存记录
|
||
|
||
Args:
|
||
source_table: 库存类型 ('stock_buy' / 'stock_semi' / 'stock_product')
|
||
stock_id: 库存记录主键ID
|
||
for_update: 是否使用 SELECT ... FOR UPDATE 悲观行锁（默认 False）
|
||
设为 True 时可防止并发调整/报废导致的 TOCTOU 竞态
|
||
"""
|
||
if source_table == 'stock_buy' and StockBuy:
|
||
q = StockBuy.query
|
||
return (q.with_for_update() if for_update else q).get(stock_id)
|
||
elif source_table == 'stock_semi' and StockSemi:
|
||
q = StockSemi.query
|
||
return (q.with_for_update() if for_update else q).get(stock_id)
|
||
elif source_table == 'stock_product' and StockProduct:
|
||
q = StockProduct.query
|
||
return (q.with_for_update() if for_update else q).get(stock_id)
|
||
return None
|
||
|
||
|
||
def _filter_by_company(query, model, company_name):
|
||
"""
|
||
对库存查询施加公司隔离。
|
||
|
||
三张库存表都没有 company_id，公司维度挂在 material_base.company_name 上，
|
||
故经由 base 关系做子查询过滤。
|
||
|
||
company_name 为 None 表示不过滤（超管/跨域用户未指定公司）；
|
||
'__NO_COMPANY__' 是 get_current_company_filter() 的哨兵值，会匹配不到任何行。
|
||
"""
|
||
if company_name is None:
|
||
return query
|
||
return query.filter(model.base.has(MaterialBase.company_name == company_name))
|
||
|
||
|
||
def get_active_locations(company_name, days=30, top_n=50):
|
||
"""
|
||
统计最近 N 天内异动最频繁的库位 —— 「动盘/抽盘」的范围来源。
|
||
|
||
数据来源（三张库存表都没有 company_id，公司维度一律经 base_id 关联 material_base）：
|
||
- 出库 trans_outbound：其 warehouse_location 历史上几乎没填（900 条里 829 条为空，
|
||
且仅 2026-09 起才部分有值），故改为经 (source_table, stock_id) 回查库存表的
|
||
warehouse_location —— 实测近 30 天覆盖率 298/299。
|
||
- 入库：入库没有独立流水表，直接以 stock_buy.in_date /
|
||
stock_semi.production_date / stock_product.production_date 作为异动时间。
|
||
- 借出 trans_borrow：用其 location 字段（填充率同样很低，80 条里仅 8 条有值）。
|
||
|
||
已知局限：
|
||
- 报废(trans_scrap)与维修(trans_repair)表没有库位字段，未纳入统计；
|
||
- 回查得到的是库存行**当前**的库位，不是异动发生当时的库位，
|
||
库存行事后迁库会让历史归因偏移；
|
||
- 库存行被删除后 JOIN 不到，该笔异动不计入。
|
||
|
||
:return: [{'location': str, 'moves': int, 'sku_count': int, 'last_move': str|None}, ...]
|
||
按异动次数降序，最多 top_n 条。
|
||
"""
|
||
since = beijing_time() - timedelta(days=days)
|
||
|
||
sql = db.text("""
|
||
WITH moves AS (
|
||
SELECT COALESCE(b.warehouse_location, s.warehouse_location, p.warehouse_location) AS loc,
|
||
o.sku AS sku, o.outbound_time AS ts,
|
||
COALESCE(m1.company_name, m2.company_name, m3.company_name) AS company
|
||
FROM trans_outbound o
|
||
LEFT JOIN stock_buy b ON o.source_table = 'stock_buy' AND b.id = o.stock_id
|
||
LEFT JOIN stock_semi s ON o.source_table = 'stock_semi' AND s.id = o.stock_id
|
||
LEFT JOIN stock_product p ON o.source_table = 'stock_product' AND p.id = o.stock_id
|
||
LEFT JOIN material_base m1 ON m1.id = b.base_id
|
||
LEFT JOIN material_base m2 ON m2.id = s.base_id
|
||
LEFT JOIN material_base m3 ON m3.id = p.base_id
|
||
WHERE o.outbound_time >= :since
|
||
|
||
UNION ALL
|
||
SELECT b2.warehouse_location, b2.sku, b2.in_date, m4.company_name
|
||
FROM stock_buy b2 JOIN material_base m4 ON m4.id = b2.base_id
|
||
WHERE b2.in_date >= :since
|
||
|
||
UNION ALL
|
||
SELECT s2.warehouse_location, s2.sku, s2.production_date, m5.company_name
|
||
FROM stock_semi s2 JOIN material_base m5 ON m5.id = s2.base_id
|
||
WHERE s2.production_date >= :since
|
||
|
||
UNION ALL
|
||
SELECT p2.warehouse_location, p2.sku, p2.production_date, m6.company_name
|
||
FROM stock_product p2 JOIN material_base m6 ON m6.id = p2.base_id
|
||
WHERE p2.production_date >= :since
|
||
|
||
UNION ALL
|
||
SELECT br.location, br.sku, br.borrow_time, m7.company_name
|
||
FROM trans_borrow br
|
||
LEFT JOIN stock_buy bs ON br.source_table = 'stock_buy' AND bs.id = br.stock_id
|
||
LEFT JOIN material_base m7 ON m7.id = bs.base_id
|
||
WHERE br.borrow_time >= :since
|
||
)
|
||
SELECT loc AS location,
|
||
count(*) AS moves,
|
||
count(DISTINCT sku) AS sku_count,
|
||
max(ts) AS last_move
|
||
FROM moves
|
||
WHERE loc IS NOT NULL AND loc <> ''
|
||
AND (:company IS NULL OR company = :company)
|
||
GROUP BY loc
|
||
ORDER BY moves DESC, loc
|
||
LIMIT :top_n
|
||
""")
|
||
|
||
rows = db.session.execute(sql, {
|
||
'since': since,
|
||
'company': company_name,
|
||
'top_n': top_n,
|
||
}).fetchall()
|
||
|
||
return [{
|
||
'location': r.location,
|
||
'moves': int(r.moves or 0),
|
||
'sku_count': int(r.sku_count or 0),
|
||
'last_move': r.last_move.strftime('%Y-%m-%d') if r.last_move else None,
|
||
} for r in rows]
|
||
|
||
|
||
def _get_session_scope(session_id):
|
||
"""读取会话的范围配置。
|
||
|
||
:return: (scope_type, locations) —— locations 仅当抽盘且配置了库位时非空
|
||
"""
|
||
if not session_id:
|
||
return STOCKTAKE_SCOPE_FULL, []
|
||
sess = StocktakeSession.query.filter_by(session_id=session_id).first()
|
||
if not sess:
|
||
return STOCKTAKE_SCOPE_FULL, []
|
||
cfg = sess.scope_config or {}
|
||
locs = cfg.get('locations') or []
|
||
if sess.scope_type != STOCKTAKE_SCOPE_ACTIVE or not locs:
|
||
return STOCKTAKE_SCOPE_FULL, []
|
||
return STOCKTAKE_SCOPE_ACTIVE, list(locs)
|
||
|
||
|
||
def find_stock_owner_company(uuid_or_barcode):
|
||
"""全局查找该条码/SKU 属于哪个公司 —— **不施加任何公司过滤**。
|
||
|
||
只在 get_stock_info 未命中时调用，用来区分两种「查不到」：
|
||
· 条码根本不存在 → 让工人核对是否扫错 / 敲错
|
||
· 条码存在但属于别家公司 → 明确告知跨公司，而不是笼统的「未找到物料」
|
||
|
||
前提：SKU / 条码在全系统全局唯一。已核验三张库存表「表内重复、跨公司重复、
|
||
跨表重复」六项检查均为 0，因此这里至多命中一条，不存在归属歧义。
|
||
|
||
:return: 公司名；查不到则 None
|
||
"""
|
||
code = str(uuid_or_barcode).strip()
|
||
if not code:
|
||
return None
|
||
|
||
checks = [
|
||
(StockProduct, lambda m, c: db.or_(m.barcode == c, m.sku == c, m.serial_number == c)),
|
||
(StockSemi, lambda m, c: db.or_(m.barcode == c, m.sku == c, m.serial_number == c)),
|
||
(StockBuy, lambda m, c: db.or_(m.barcode == c, m.sku == c)),
|
||
]
|
||
for model, cond_fn in checks:
|
||
if not model:
|
||
continue
|
||
row = db.session.query(MaterialBase.company_name).join(
|
||
model, model.base_id == MaterialBase.id
|
||
).filter(cond_fn(model, code)).first()
|
||
if row and row[0]:
|
||
return row[0]
|
||
return None
|
||
|
||
|
||
def _classify_missing_stock(code, company_name):
|
||
"""把「查不到库存」细分为「不存在」与「跨公司」。
|
||
|
||
:return: (msg, http_status) —— 调用方按自己的响应结构包装
|
||
"""
|
||
if company_name and company_name != '__NO_COMPANY__':
|
||
owner = find_stock_owner_company(code)
|
||
if owner and owner != company_name:
|
||
return f'条码 [{code}] 属于【{owner}】，请勿跨公司盘点', 403
|
||
return f'未找到该物料库存: {code}', 404
|
||
|
||
|
||
def get_stock_info(uuid_or_barcode, company_name=None):
|
||
"""
|
||
根据 uuid 或 barcode 查询库存信息（★ 精确匹配优先，性能与准确性兼顾）
|
||
|
||
修复: 原来用 ilike %x% 全表模糊搜索 + .first()，
|
||
在 SKU 前缀相同的场景会命中错误记录或漏匹配。
|
||
改为: 精确匹配(==)优先，命中即返回；无精确命中再回退模糊搜索。
|
||
|
||
★ 公司隔离: 不同公司可能存在相同 barcode/sku，不加公司条件时先被查到的
|
||
记录会「吃掉」条码，造成跨公司串货。company_name 由调用方经
|
||
get_current_company_filter() 取得。
|
||
|
||
返回: (item, source_table, stock_id) 或 (None, None, None)
|
||
"""
|
||
# 清洗输入：去掉前后空格和换行符
|
||
code = str(uuid_or_barcode).strip()
|
||
if not code:
|
||
return None, None, None
|
||
|
||
# ===== 精确匹配优先（走索引，快且准） =====
|
||
exact_checks = [
|
||
(StockProduct, lambda c: db.or_(
|
||
StockProduct.barcode == c,
|
||
StockProduct.sku == c,
|
||
StockProduct.serial_number == c
|
||
), 'stock_product'),
|
||
(StockSemi, lambda c: db.or_(
|
||
StockSemi.barcode == c,
|
||
StockSemi.sku == c,
|
||
StockSemi.serial_number == c
|
||
), 'stock_semi'),
|
||
(StockBuy, lambda c: db.or_(
|
||
StockBuy.barcode == c,
|
||
StockBuy.sku == c
|
||
), 'stock_buy'),
|
||
]
|
||
|
||
for model, cond_fn, table_name in exact_checks:
|
||
if not model:
|
||
continue
|
||
item = _filter_by_company(model.query, model, company_name).filter(cond_fn(code)).first()
|
||
if item:
|
||
return (item, table_name, item.id)
|
||
|
||
# ===== 精确未命中 → 回退模糊搜索（保留旧行为兜底） =====
|
||
fuzzy_checks = [
|
||
(StockProduct, lambda c: db.or_(
|
||
StockProduct.barcode.ilike(f"%{c}%"),
|
||
StockProduct.sku.ilike(f"%{c}%"),
|
||
StockProduct.serial_number.ilike(f"%{c}%")
|
||
), 'stock_product'),
|
||
(StockSemi, lambda c: db.or_(
|
||
StockSemi.barcode.ilike(f"%{c}%"),
|
||
StockSemi.sku.ilike(f"%{c}%"),
|
||
StockSemi.serial_number.ilike(f"%{c}%")
|
||
), 'stock_semi'),
|
||
(StockBuy, lambda c: db.or_(
|
||
StockBuy.barcode.ilike(f"%{c}%"),
|
||
StockBuy.sku.ilike(f"%{c}%")
|
||
), 'stock_buy'),
|
||
]
|
||
|
||
for model, cond_fn, table_name in fuzzy_checks:
|
||
if not model:
|
||
continue
|
||
item = _filter_by_company(model.query, model, company_name).filter(cond_fn(code)).first()
|
||
if item:
|
||
return (item, table_name, item.id)
|
||
|
||
return None, None, None
|
||
|
||
return (None, None, None)
|
||
|
||
|
||
@bp.route('/all', methods=['GET'])
|
||
@jwt_required()
|
||
def get_all_stock():
|
||
"""
|
||
获取所有库存 > 0 的物品
|
||
支持 AI 极简模式: ?ai_mode=true
|
||
- 只返回 name / spec / availableQuantity 三个字段
|
||
- 键名压缩为 n / s / c
|
||
|
||
★ Fail-Closed: 非 AI 模式自动剥离所有价格成本字段
|
||
"""
|
||
ai_mode = request.args.get('ai_mode', '').lower() == 'true'
|
||
_strip = _make_price_stripper('inventory_stocktake')
|
||
|
||
try:
|
||
all_items = []
|
||
|
||
# 1. 采购件
|
||
if StockBuy:
|
||
rows = StockBuy.query.filter(
|
||
StockBuy.stock_quantity > 0
|
||
).options(joinedload(StockBuy.base)).all()
|
||
for item in rows:
|
||
if ai_mode:
|
||
b = item.base
|
||
all_items.append({
|
||
'n': b.name if b else '',
|
||
's': b.spec_model if b else '',
|
||
'c': float(item.available_quantity or 0)
|
||
})
|
||
else:
|
||
d = item.to_dict()
|
||
_strip(d, 'buy')
|
||
all_items.append(d)
|
||
|
||
# 2. 半成品
|
||
if StockSemi:
|
||
try:
|
||
rows = StockSemi.query.filter(
|
||
StockSemi.stock_quantity > 0
|
||
).options(joinedload(StockSemi.base)).all()
|
||
for item in rows:
|
||
if ai_mode:
|
||
b = item.base
|
||
all_items.append({
|
||
'n': b.name if b else '',
|
||
's': b.spec_model if b else '',
|
||
'c': float(item.available_quantity or 0)
|
||
})
|
||
else:
|
||
d = item.to_dict()
|
||
_strip(d, 'semi')
|
||
all_items.append(d)
|
||
except Exception:
|
||
pass
|
||
|
||
# 3. 成品
|
||
if StockProduct:
|
||
try:
|
||
rows = StockProduct.query.filter(
|
||
StockProduct.stock_quantity > 0
|
||
).options(joinedload(StockProduct.base)).all()
|
||
for item in rows:
|
||
if ai_mode:
|
||
b = item.base
|
||
all_items.append({
|
||
'n': b.name if b else '',
|
||
's': b.spec_model if b else '',
|
||
'c': float(item.available_quantity or 0)
|
||
})
|
||
else:
|
||
d = item.to_dict()
|
||
_strip(d, 'product')
|
||
all_items.append(d)
|
||
except Exception:
|
||
pass
|
||
|
||
return jsonify(all_items), 200
|
||
except Exception as e:
|
||
print(f"Error: {e}")
|
||
return jsonify({"message": f"查询库存失败: {str(e)}"}), 500
|
||
|
||
|
||
# ==============================================================================
|
||
# 分页库存查询接口（服务端分页，出库/盘点/借用模块共用）
|
||
# ==============================================================================
|
||
def _make_price_stripper(permission_prefix=None):
|
||
"""
|
||
Fail-Closed 价格字段剥离器工厂。
|
||
|
||
选单/借用场景默认剥离所有价格字段；
|
||
仅当 permission_prefix 不在已知选单前缀列表中时放行（例如 material_list 场景由调用方自行处理）。
|
||
"""
|
||
# 已知的选单/借用前缀 → 无条件剥离所有价格成本
|
||
# ★ 新增前缀必须登记在此，否则该前缀的调用方会拿到价格/成本字段（Fail-Closed 失效）
|
||
SELECTION_PREFIXES = {'outbound_selection', 'op_borrow_apply', 'inventory_stocktake', 'scrap_apply'}
|
||
|
||
def stripper(d, stock_category):
|
||
if permission_prefix is None or permission_prefix in SELECTION_PREFIXES:
|
||
if stock_category == 'buy':
|
||
for k in ('unit_price', 'post_tax_unit_price', 'total_price',
|
||
'tax_rate', 'currency', 'exchange_rate',
|
||
'pre_tax_unit_price', 'qty_inbound', 'in_quantity'):
|
||
d.pop(k, None)
|
||
elif stock_category == 'semi':
|
||
for k in ('raw_material_cost', 'manual_cost', 'unit_total_cost',
|
||
'total_price', 'unit_price'):
|
||
d.pop(k, None)
|
||
elif stock_category == 'product':
|
||
for k in ('raw_material_cost', 'manual_cost', 'unit_total_cost',
|
||
'sale_price', 'unit_price'):
|
||
d.pop(k, None)
|
||
return stripper
|
||
|
||
|
||
def _do_get_stock_list(permission_prefix=None):
|
||
"""
|
||
分页获取库存列表（stock_quantity > 0） — 裸逻辑，供各模块复用
|
||
|
||
Args:
|
||
permission_prefix: 可选权限前缀（如 'outbound_selection' / 'op_borrow_apply'）。
|
||
传入后自动剥离对应模块无权查看的价格/成本字段。
|
||
"""
|
||
try:
|
||
page = request.args.get('page', 1, type=int)
|
||
pageSize = request.args.get('pageSize', 20, type=int)
|
||
keyword = request.args.get('keyword', '', type=str).strip()
|
||
|
||
if page < 1:
|
||
page = 1
|
||
if pageSize < 1 or pageSize > 200:
|
||
pageSize = 20
|
||
|
||
# ★ Fail-Closed: 选单/借用场景默认剥离所有价格成本字段
|
||
_strip_price_fields = _make_price_stripper(permission_prefix)
|
||
|
||
# ★ 行级公司隔离：普通用户只能看到本公司的库存（超管/跨域不受限）
|
||
company_limit = get_current_company_filter()
|
||
|
||
all_items = []
|
||
|
||
# 1. 采购件
|
||
if StockBuy:
|
||
q = StockBuy.query.filter(StockBuy.stock_quantity > 0)
|
||
if company_limit is not None:
|
||
q = q.filter(StockBuy.base.has(MaterialBase.company_name == company_limit))
|
||
if keyword:
|
||
q = q.filter(
|
||
db.or_(
|
||
StockBuy.base.has(MaterialBase.name.ilike(f'%{keyword}%')),
|
||
StockBuy.base.has(MaterialBase.spec_model.ilike(f'%{keyword}%')),
|
||
StockBuy.sku.ilike(f'%{keyword}%')
|
||
)
|
||
)
|
||
rows = q.all()
|
||
for item in rows:
|
||
d = item.to_dict()
|
||
d['source_table'] = 'stock_buy' # ★ 报废等按单流程需要精准定位来源表
|
||
d['stock_type'] = 'material'
|
||
d['type'] = 'material'
|
||
d['typeLabel'] = '采购件'
|
||
d['name'] = d.get('material_name', d.get('name', ''))
|
||
d['standard'] = d.get('spec_model', d.get('standard', ''))
|
||
d['available_quantity'] = d.get('qty_available', d.get('available_quantity', 0))
|
||
_strip_price_fields(d, 'buy')
|
||
all_items.append(d)
|
||
|
||
# 2. 半成品
|
||
if StockSemi:
|
||
try:
|
||
q = StockSemi.query.filter(StockSemi.stock_quantity > 0)
|
||
if company_limit is not None:
|
||
q = q.filter(StockSemi.base.has(MaterialBase.company_name == company_limit))
|
||
if keyword:
|
||
q = q.filter(
|
||
db.or_(
|
||
StockSemi.base.has(MaterialBase.name.ilike(f'%{keyword}%')),
|
||
StockSemi.base.has(MaterialBase.spec_model.ilike(f'%{keyword}%')),
|
||
StockSemi.sku.ilike(f'%{keyword}%')
|
||
)
|
||
)
|
||
rows = q.all()
|
||
for item in rows:
|
||
d = item.to_dict()
|
||
d['source_table'] = 'stock_semi' # ★ 精准来源表
|
||
d['stock_type'] = 'semi'
|
||
d['type'] = 'semi'
|
||
d['typeLabel'] = '半成品'
|
||
d['name'] = d.get('material_name', d.get('name', ''))
|
||
d['standard'] = d.get('spec_model', d.get('standard', ''))
|
||
d['available_quantity'] = d.get('qty_available', d.get('available_quantity', 0))
|
||
_strip_price_fields(d, 'semi')
|
||
all_items.append(d)
|
||
except Exception:
|
||
pass
|
||
|
||
# 3. 成品
|
||
if StockProduct:
|
||
q = StockProduct.query.filter(StockProduct.stock_quantity > 0)
|
||
if company_limit is not None:
|
||
q = q.filter(StockProduct.base.has(MaterialBase.company_name == company_limit))
|
||
if keyword:
|
||
q = q.filter(
|
||
db.or_(
|
||
StockProduct.base.has(MaterialBase.name.ilike(f'%{keyword}%')),
|
||
StockProduct.base.has(MaterialBase.spec_model.ilike(f'%{keyword}%')),
|
||
StockProduct.sku.ilike(f'%{keyword}%'),
|
||
StockProduct.barcode.ilike(f'%{keyword}%'),
|
||
StockProduct.serial_number.ilike(f'%{keyword}%')
|
||
)
|
||
)
|
||
rows = q.all()
|
||
for item in rows:
|
||
d = item.to_dict()
|
||
d['source_table'] = 'stock_product' # ★ 精准来源表
|
||
d['stock_type'] = 'product'
|
||
d['type'] = 'product'
|
||
d['typeLabel'] = '成品'
|
||
d['name'] = d.get('material_name', d.get('name', ''))
|
||
d['standard'] = d.get('spec_model', d.get('standard', ''))
|
||
d['available_quantity'] = d.get('qty_available', d.get('available_quantity', 0))
|
||
_strip_price_fields(d, 'product')
|
||
all_items.append(d)
|
||
|
||
# ── 按规格+库位聚合（出库选单合并同类项）───────────────────────
|
||
is_aggregated = request.args.get('is_aggregated', 'false').lower() == 'true'
|
||
|
||
if is_aggregated:
|
||
grouped_dict = {}
|
||
for item in all_items:
|
||
# 核心聚合键：类型 + 规格型号 + 库位 + base_id（含 base_id 防止不同物料被错误合并）
|
||
group_key = f"{item.get('type')}_{item.get('standard')}_{item.get('warehouse_location', '')}_{item.get('base_id', '')}"
|
||
|
||
if group_key in grouped_dict:
|
||
# 累加数量
|
||
existing = grouped_dict[group_key]
|
||
existing['available_quantity'] = float(existing.get('available_quantity', 0)) + float(item.get('available_quantity', 0))
|
||
existing['stock_quantity'] = float(existing.get('stock_quantity', 0)) + float(item.get('stock_quantity', 0))
|
||
# 保留 id 列表（出库提交时需用到）
|
||
existing_ids = existing.get('_ids', [])
|
||
existing_ids.append(item.get('id'))
|
||
existing['_ids'] = existing_ids
|
||
else:
|
||
# 存入代表项
|
||
grouped_dict[group_key] = item.copy()
|
||
# 强制统一数据类型以便前端处理
|
||
grouped_dict[group_key]['available_quantity'] = float(item.get('available_quantity', 0))
|
||
grouped_dict[group_key]['stock_quantity'] = float(item.get('stock_quantity', 0))
|
||
grouped_dict[group_key]['_ids'] = [item.get('id')]
|
||
|
||
# 替换原列表为聚合后的列表
|
||
all_items = list(grouped_dict.values())
|
||
|
||
# ── 手动切片分页 ────────────────────────────────────────────
|
||
total = len(all_items)
|
||
start = (page - 1) * pageSize
|
||
end = start + pageSize
|
||
paged = all_items[start:end]
|
||
|
||
return jsonify({
|
||
'msg': '获取成功',
|
||
'data': {
|
||
'list': paged,
|
||
'total': total,
|
||
'page': page,
|
||
'pageSize': pageSize
|
||
}
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
current_app.logger.error(f"Get Stock List Failed: {str(e)}")
|
||
return jsonify({'msg': f'获取库存列表失败: {str(e)}'}), 500
|
||
|
||
|
||
@bp.route('/list', methods=['GET'])
|
||
@jwt_required()
|
||
@permission_required('outbound_selection')
|
||
def get_stock_list():
|
||
"""出库选单专用库存列表 — Fail-Closed: 剥离价格字段"""
|
||
return _do_get_stock_list(permission_prefix='outbound_selection')
|
||
|
||
|
||
# --------------------------------------------------------
|
||
# 盘库/出库/借库 扫码精确匹配接口
|
||
# GET /api/v1/inbound/stock/scan?barcode=xxx
|
||
# 精确匹配优先，替代前端 pageSize:10 模糊搜索 + find() 的漏匹配问题
|
||
# --------------------------------------------------------
|
||
@bp.route('/scan', methods=['GET'])
|
||
@jwt_required()
|
||
def scan_stock_by_barcode():
|
||
"""根据条码精确匹配库存记录（一次返回唯一命中，性能好且准确）"""
|
||
try:
|
||
barcode = request.args.get('barcode', '').strip()
|
||
if not barcode:
|
||
return jsonify({'code': 400, 'msg': 'barcode 不能为空'}), 400
|
||
|
||
company_limit = get_current_company_filter()
|
||
item, source_table, stock_id = get_stock_info(barcode, company_limit)
|
||
if not item:
|
||
# 区分「条码不存在」与「属于别家公司」，给现场人员可执行的提示
|
||
msg, status = _classify_missing_stock(barcode, company_limit)
|
||
return jsonify({'code': status, 'msg': msg}), status
|
||
|
||
d = item.to_dict()
|
||
d['stock_type'] = source_table.replace('stock_', '')
|
||
d['type'] = source_table.replace('stock_', '')
|
||
d['source_table'] = source_table
|
||
d['stock_id'] = stock_id
|
||
# 兼容前端字段
|
||
if hasattr(item, 'base') and item.base:
|
||
d['name'] = d.get('material_name') or item.base.name or ''
|
||
d['standard'] = d.get('spec_model') or item.base.spec_model or ''
|
||
d['stock_quantity'] = float(d.get('stock_quantity') or d.get('qty_stock') or 0)
|
||
d['available_quantity'] = float(d.get('available_quantity') or d.get('qty_available') or 0)
|
||
|
||
return jsonify({'code': 200, 'msg': 'success', 'data': d}), 200
|
||
except Exception as e:
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': str(e)}), 500
|
||
|
||
|
||
# --- 草稿箱接口 ---
|
||
|
||
@bp.route('/draft/list', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_drafts():
|
||
"""
|
||
获取盘点草稿列表
|
||
支持分页、搜索（SKU）和排序
|
||
"""
|
||
# 获取分页参数
|
||
page = request.args.get('page', 1, type=int)
|
||
limit = request.args.get('limit', 20, type=int)
|
||
keyword = request.args.get('keyword', '', type=str)
|
||
session_id = request.args.get('session_id')
|
||
uuid = request.args.get('uuid', '', type=str)
|
||
|
||
# ★ 公司隔离：普通用户只能看到本公司的盘点草稿（超管/跨域不过滤）
|
||
company_name = get_current_company_filter()
|
||
|
||
# 防止 limit 过大（保持防御性上限，避免极端参数拖垮数据库）
|
||
limit = min(max(limit, 1), 500)
|
||
|
||
# ── 公共 JOIN 片段：草稿按 source_table 关联三张库存表 + material_base ──
|
||
join_sql = """
|
||
FROM stocktake_draft sd
|
||
LEFT JOIN stock_buy b ON sd.source_table = 'stock_buy' AND b.id = sd.stock_id
|
||
LEFT JOIN stock_semi s ON sd.source_table = 'stock_semi' AND s.id = sd.stock_id
|
||
LEFT JOIN stock_product p ON sd.source_table = 'stock_product' AND p.id = sd.stock_id
|
||
LEFT JOIN material_base mb ON mb.id = COALESCE(b.base_id, s.base_id, p.base_id)
|
||
"""
|
||
|
||
# ── 动态 WHERE 条件（全部参数绑定，防止 SQL 注入）──
|
||
conditions = []
|
||
params = {}
|
||
if company_name is not None:
|
||
conditions.append('sd.company_name = :company')
|
||
params['company'] = company_name
|
||
if session_id:
|
||
conditions.append('sd.session_id = :sid')
|
||
params['sid'] = session_id
|
||
if uuid:
|
||
conditions.append('sd.uuid = :uuid')
|
||
params['uuid'] = uuid
|
||
if keyword:
|
||
conditions.append("LOWER(COALESCE(b.sku, s.sku, p.sku, '')) LIKE :kw")
|
||
params['kw'] = f'%{keyword.lower()}%'
|
||
where_clause = ('WHERE ' + ' AND '.join(conditions)) if conditions else ''
|
||
|
||
# ── 总数（COUNT 聚合，不再全量拉取到内存）──
|
||
count_sql = f'SELECT COUNT(*) {join_sql} {where_clause}'
|
||
total = db.session.execute(db.text(count_sql), params).scalar() or 0
|
||
|
||
# ── 真实已盘数（按库存维度去重）──
|
||
scanned_sql = f"""
|
||
SELECT COUNT(*) FROM (
|
||
SELECT 1 {join_sql} {where_clause}
|
||
GROUP BY sd.source_table, sd.stock_id
|
||
) t
|
||
"""
|
||
total_scanned = db.session.execute(db.text(scanned_sql), params).scalar() or 0
|
||
|
||
# ── 数据查询（真正的数据库级 LIMIT/OFFSET 分页，一次性连表取字段）──
|
||
offset = (page - 1) * limit
|
||
data_sql = f"""
|
||
SELECT
|
||
sd.id AS draft_id, sd.user_id, sd.uuid, sd.quantity, sd.scan_time,
|
||
sd.session_id, sd.source_table, sd.stock_id, sd.stock_qty, sd.diff_qty, sd.remark,
|
||
COALESCE(b.sku, s.sku, p.sku, '') AS sku,
|
||
mb.name AS material_name,
|
||
mb.spec_model AS spec_model
|
||
{join_sql}
|
||
{where_clause}
|
||
ORDER BY LOWER(COALESCE(b.sku, s.sku, p.sku, ''))
|
||
LIMIT :limit OFFSET :offset
|
||
"""
|
||
query_params = dict(params)
|
||
query_params['limit'] = limit
|
||
query_params['offset'] = offset
|
||
rows = db.session.execute(db.text(data_sql), query_params).fetchall()
|
||
|
||
# ── 组装返回结构（仅当前页数据，无 N+1）──
|
||
items = []
|
||
for row in rows:
|
||
items.append({
|
||
'id': row.draft_id,
|
||
'user_id': row.user_id,
|
||
'uuid': row.uuid,
|
||
'quantity': float(row.quantity or 1),
|
||
'scan_time': row.scan_time.strftime('%Y-%m-%d %H:%M:%S') if row.scan_time else None,
|
||
'session_id': row.session_id,
|
||
'source_table': row.source_table,
|
||
'stock_id': row.stock_id,
|
||
'stock_qty': float(row.stock_qty or 0),
|
||
'diff_qty': float(row.diff_qty or 0),
|
||
'remark': row.remark,
|
||
'sku': row.sku or '',
|
||
'material_name': row.material_name or '',
|
||
'spec_model': row.spec_model or ''
|
||
})
|
||
|
||
return jsonify({
|
||
'items': items,
|
||
'total': total,
|
||
'total_scanned': total_scanned,
|
||
'page': page,
|
||
'limit': limit
|
||
}), 200
|
||
|
||
|
||
@bp.route('/draft/add', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def add_draft():
|
||
"""
|
||
扫码同步 (支持更新数量)
|
||
如果 session_id 不存在则创建新的会话
|
||
|
||
差异计算逻辑调整：
|
||
- adjusted_stock_qty = 账面总库存 - 借出未还数量
|
||
- diff_qty = 实盘数量 - adjusted_stock_qty
|
||
"""
|
||
try:
|
||
data = request.json
|
||
user_id = _normalize_user_id()
|
||
uuid = data.get('uuid')
|
||
print(f"🚀 [SCAN DEBUG] 后端实际接收到的 UUID 原文: |{uuid}| (长度: {len(str(uuid)) if uuid else 0})")
|
||
quantity = float(data.get('quantity', 1))
|
||
session_id = data.get('session_id')
|
||
# ★ 新增: 提取备注字段
|
||
remark = data.get('remark')
|
||
|
||
if not uuid:
|
||
return jsonify({"message": "UUID不能为空"}), 400
|
||
|
||
# 如果没有 session_id，创建新的
|
||
if not session_id:
|
||
session_id = f"STK-{datetime.now().strftime('%Y%m%d%H%M%S')}-{uuid_module.uuid4().hex[:6]}"
|
||
|
||
# ★ 公司隔离：按当前用户所属公司查库存，避免跨公司同码物料串货
|
||
company_name = get_current_company_filter()
|
||
|
||
# 获取库存信息
|
||
item, source_table, stock_id = get_stock_info(uuid, company_name)
|
||
if not item:
|
||
# 区分「条码不存在」与「属于别家公司」
|
||
msg, status = _classify_missing_stock(uuid, company_name)
|
||
return jsonify({"message": msg}), status
|
||
|
||
# 账面总库存
|
||
stock_qty = float(item.stock_quantity) if item.stock_quantity else 0
|
||
|
||
# 计算借出未还数量 (quantity - returned_quantity)
|
||
borrowed_result = db.session.query(
|
||
db.func.sum(db.func.coalesce(TransBorrow.quantity, 0) - db.func.coalesce(TransBorrow.returned_quantity, 0))
|
||
).filter(
|
||
TransBorrow.source_table == source_table,
|
||
TransBorrow.stock_id == stock_id,
|
||
TransBorrow.is_returned == False
|
||
).scalar()
|
||
total_borrowed = float(borrowed_result) if borrowed_result else 0
|
||
|
||
# 调整后的账面可用库存 = 账面总库存 - 借出未还数量
|
||
adjusted_stock_qty = stock_qty - total_borrowed
|
||
|
||
# ★ 查找是否已存在：按 (company_name, session_id, uuid) 去重，不按 user_id 隔离
|
||
# 修复: 同一盘点单多个用户（手机/平板不同账号）操作同一物料时，
|
||
# 之前按 user_id 匹配导致每个用户各建一条 → 重复记录
|
||
# ★ 公司隔离: 去重键必须含公司，否则跨公司同码物料会互相覆盖
|
||
draft = StocktakeDraft.query.filter_by(
|
||
uuid=uuid, session_id=session_id, company_name=company_name
|
||
).first()
|
||
|
||
if draft:
|
||
# 如果已存在，更新数量和时间
|
||
draft.quantity = quantity
|
||
draft.scan_time = datetime.now()
|
||
draft.stock_qty = adjusted_stock_qty
|
||
draft.diff_qty = quantity - adjusted_stock_qty
|
||
draft.source_table = source_table
|
||
draft.stock_id = stock_id
|
||
# 更新操作用户（最后操作者）
|
||
draft.user_id = user_id
|
||
# ★ 新增: 保存备注
|
||
if remark is not None:
|
||
draft.remark = remark.strip() if isinstance(remark, str) else remark
|
||
else:
|
||
# 如果不存在，创建新的
|
||
draft = StocktakeDraft(
|
||
user_id=user_id,
|
||
uuid=uuid,
|
||
quantity=quantity,
|
||
session_id=session_id,
|
||
stock_qty=adjusted_stock_qty,
|
||
diff_qty=quantity - adjusted_stock_qty,
|
||
source_table=source_table,
|
||
stock_id=stock_id,
|
||
# ★ 新增: 保存备注
|
||
remark=remark.strip() if isinstance(remark, str) and remark else (remark if remark else None),
|
||
# ★ 公司隔离: 记录该草稿所属公司
|
||
company_name=company_name
|
||
)
|
||
db.session.add(draft)
|
||
|
||
db.session.commit()
|
||
return jsonify({
|
||
"message": "Saved",
|
||
"session_id": session_id,
|
||
"draft_id": draft.id,
|
||
"adjusted_stock_qty": adjusted_stock_qty,
|
||
"total_borrowed": total_borrowed
|
||
}), 200
|
||
except Exception as e:
|
||
print(f"Add Draft Error: {e}")
|
||
db.session.rollback()
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
@bp.route('/draft/clear', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def clear_draft():
|
||
"""
|
||
清除盘点草稿
|
||
|
||
★ 必须指定 session_id —— 禁止不传参全表清空（历史上会误删其他公司/用户的进度）。
|
||
清除范围同时受公司隔离约束。
|
||
"""
|
||
data = request.json or {}
|
||
session_id = data.get('session_id')
|
||
if not session_id or not str(session_id).strip():
|
||
return jsonify({"message": "session_id 不能为空"}), 400
|
||
|
||
company_name = get_current_company_filter()
|
||
|
||
try:
|
||
# 清除指定会话（且限于本公司）
|
||
query = StocktakeDraft.query.filter_by(session_id=session_id)
|
||
if company_name is not None:
|
||
query = query.filter_by(company_name=company_name)
|
||
|
||
# 改为对象级删除以触发审计事件
|
||
records = query.all()
|
||
count = len(records)
|
||
for rec in records:
|
||
db.session.delete(rec)
|
||
db.session.commit()
|
||
|
||
return jsonify({"message": f"已清除 {count} 条记录", "count": count}), 200
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
@bp.route('/stocktake/companies', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_stocktake_companies():
|
||
"""
|
||
盘点页「公司选择器」的选项。
|
||
|
||
单独开接口而不复用 /inbound/buy/options，原因有二：
|
||
1. 后者要求 inbound_buy 权限，只做盘点的库管会 403；
|
||
2. 后者返回全部公司名，而普通用户只需要看得到本公司（后端本来就会强制隔离）。
|
||
|
||
返回: { companies: [str] } —— 超管拿到全部公司，普通用户只拿到本公司。
|
||
"""
|
||
company_name = get_current_company_filter()
|
||
|
||
try:
|
||
query = db.session.query(MaterialBase.company_name).filter(
|
||
MaterialBase.company_name.isnot(None),
|
||
MaterialBase.company_name != ''
|
||
)
|
||
|
||
# '__NO_COMPANY__' 是 get_current_company_filter 的哨兵值（用户未绑定公司），
|
||
# 拿它去匹配只会得到空列表 —— 这正是期望行为。
|
||
if company_name is not None:
|
||
query = query.filter(MaterialBase.company_name == company_name)
|
||
|
||
companies = sorted({r[0] for r in query.distinct().all()})
|
||
|
||
return jsonify({'code': 200, 'data': {'companies': companies}}), 200
|
||
except Exception as e:
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': str(e)}), 500
|
||
|
||
|
||
@bp.route('/stocktake/recommend-locations', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def recommend_locations():
|
||
"""
|
||
推荐近 N 天最活跃的库位 —— 供前端「活跃库位抽盘」的树形勾选做预选。
|
||
|
||
★ 只推荐、不落库。最终范围由用户在库位树上微调后，随 /draft/start-new
|
||
的 scope_config.locations 一并提交，决定权在前端 UI。
|
||
|
||
查询参数: days(默认30) / top_n(默认50)
|
||
返回: { locations: [full_path...], detail: [{location,moves,sku_count,last_move}], days, top_n }
|
||
"""
|
||
company_name = get_current_company_filter()
|
||
if not company_name or company_name == '__NO_COMPANY__':
|
||
return jsonify({'code': 400, 'msg': '请先选择公司，再获取推荐库位'}), 400
|
||
|
||
try:
|
||
days = int(request.args.get('days', 30))
|
||
top_n = int(request.args.get('top_n', 50))
|
||
except (TypeError, ValueError):
|
||
return jsonify({'code': 400, 'msg': 'days / top_n 必须是整数'}), 400
|
||
|
||
# 防御性上限，避免把整库扫进来
|
||
days = max(1, min(days, 365))
|
||
top_n = max(1, min(top_n, 500))
|
||
|
||
try:
|
||
locs = get_active_locations(company_name, days=days, top_n=top_n)
|
||
return jsonify({
|
||
'code': 200,
|
||
'data': {
|
||
'locations': [x['location'] for x in locs],
|
||
'detail': locs,
|
||
'days': days,
|
||
'top_n': top_n,
|
||
}
|
||
}), 200
|
||
except Exception as e:
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': str(e)}), 500
|
||
|
||
|
||
@bp.route('/draft/active-session', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_active_session():
|
||
"""
|
||
获取当前公司正在进行的盘点会话。
|
||
|
||
多人多设备协同：PDA 进入盘点页先问这个接口 —— 若本司已有同事开过的会话，
|
||
直接加入该 session_id，而不是各开各的。
|
||
|
||
★ 改造：改为直接查 stocktake_session（company_name + status='active'）。
|
||
旧实现靠 max(scan_time) 从草稿行里猜「最近会话」，有两个先天缺陷：
|
||
1. 空会话（刚开启还没扫码）在草稿表里没有行，会被误判为「无盘点」，
|
||
其他 PDA 于是各开各的，会话分裂；
|
||
2. 已结束的会话没有状态标记，generate-missing 跑完后仍被当成活跃。
|
||
现在活跃判定是精确查询，两个问题一并解决。
|
||
|
||
返回: {
|
||
session_id: str|null,
|
||
mode: 'open'|'blind'|null, # 明盘/盲盘
|
||
scope_type: 'full'|'active'|null,# 全仓/抽盘
|
||
total: int, # 该会话的草稿行数
|
||
scanned: int, # 实际扫到的件数（按物料去重，排除系统自动生成的漏盘记录）
|
||
last_scan_time: str|null,
|
||
initiator: str|null, # 发起人显示名（该会话最早一条扫码记录的操作人）
|
||
}
|
||
"""
|
||
company_name = get_current_company_filter()
|
||
|
||
empty = {
|
||
'session_id': None, 'mode': None, 'scope_type': None,
|
||
'total': 0, 'scanned': 0, 'last_scan_time': None, 'initiator': None
|
||
}
|
||
|
||
# 跨域角色未指定公司时无法确定「哪个公司的活跃会话」，直接返回无
|
||
if not company_name or company_name == '__NO_COMPANY__':
|
||
return jsonify({'code': 200, 'data': empty}), 200
|
||
|
||
try:
|
||
session = StocktakeSession.query.filter_by(
|
||
company_name=company_name, status=STOCKTAKE_STATUS_ACTIVE
|
||
).order_by(StocktakeSession.created_at.desc()).first()
|
||
|
||
if not session:
|
||
return jsonify({'code': 200, 'data': empty}), 200
|
||
|
||
session_id = session.session_id
|
||
|
||
def _scoped(q):
|
||
return q.filter(
|
||
StocktakeDraft.company_name == company_name,
|
||
StocktakeDraft.session_id == session_id
|
||
)
|
||
|
||
# 已扫件数：按 (source_table, stock_id) 去重。
|
||
# 排除 user_id == 'system' 的记录 —— 那是「结束盘点」时 generate-missing
|
||
# 自动生成的漏盘（实盘=0），不是人扫到的，计入会让进度虚高。
|
||
scanned = _scoped(
|
||
db.session.query(StocktakeDraft.source_table, StocktakeDraft.stock_id)
|
||
.filter(StocktakeDraft.user_id != 'system')
|
||
).distinct().count()
|
||
|
||
agg = _scoped(
|
||
db.session.query(
|
||
db.func.count(StocktakeDraft.id).label('total'),
|
||
db.func.max(StocktakeDraft.scan_time).label('last_scan_time')
|
||
)
|
||
).first()
|
||
|
||
# 发起人：该会话最早一条非系统扫码记录的操作人。
|
||
# 注：/draft/add 更新已有记录时会把 user_id 改写成「最后操作者」，
|
||
# 所以这里取到的是最早那条记录的最后操作人，是当前模型下最接近发起人的信号。
|
||
first_row = _scoped(
|
||
db.session.query(StocktakeDraft.user_id)
|
||
.filter(StocktakeDraft.user_id != 'system')
|
||
).order_by(StocktakeDraft.scan_time.asc()).first()
|
||
initiator = _resolve_user_name(first_row[0]) if first_row and first_row[0] else None
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'data': {
|
||
'session_id': session_id,
|
||
'mode': session.mode,
|
||
'scope_type': session.scope_type,
|
||
'total': int(agg.total or 0) if agg else 0,
|
||
'scanned': int(scanned or 0),
|
||
'last_scan_time': agg.last_scan_time.strftime('%Y-%m-%d %H:%M:%S') if agg and agg.last_scan_time else None,
|
||
'initiator': initiator
|
||
}
|
||
}), 200
|
||
except Exception as e:
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': str(e)}), 500
|
||
|
||
|
||
@bp.route('/draft/start-new', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def start_new_session():
|
||
"""
|
||
开始新一轮盘点：签发 session_id 并落库一条 StocktakeSession(status='active')。
|
||
|
||
- 不删除任何历史草稿：新旧会话靠 session_id 隔离，清理走 /draft/clear
|
||
- 同一公司同时只允许一个活跃会话（DB 唯一部分索引兜底），
|
||
因此先把该公司原有的活跃会话置为 finished，再插入新记录（同一事务）。
|
||
"""
|
||
data = request.get_json(silent=True) or {}
|
||
|
||
# 公司：普通用户强制取本公司；跨域角色（超管/WAREHOUSE_MGR）必须显式指定
|
||
company_limit = get_current_company_filter()
|
||
if company_limit == '__NO_COMPANY__':
|
||
return jsonify({"message": "当前账号未绑定公司，无法开始盘点"}), 400
|
||
if company_limit is None:
|
||
company_name = (data.get('company_name') or '').strip()
|
||
if not company_name or company_name.upper() == 'ALL':
|
||
return jsonify({"message": "请先选择要盘点的公司"}), 400
|
||
else:
|
||
company_name = company_limit
|
||
|
||
mode = (data.get('mode') or STOCKTAKE_MODE_OPEN).strip().lower()
|
||
if mode not in (STOCKTAKE_MODE_OPEN, STOCKTAKE_MODE_BLIND):
|
||
return jsonify({"message": f"不支持的盘点模式: {mode}"}), 400
|
||
|
||
scope_type = (data.get('scope_type') or STOCKTAKE_SCOPE_FULL).strip().lower()
|
||
if scope_type not in (STOCKTAKE_SCOPE_FULL, STOCKTAKE_SCOPE_ACTIVE):
|
||
return jsonify({"message": f"不支持的盘点范围: {scope_type}"}), 400
|
||
|
||
scope_config = data.get('scope_config') or {}
|
||
if not isinstance(scope_config, dict):
|
||
return jsonify({"message": "scope_config 必须是对象"}), 400
|
||
|
||
# ★ 抽盘：开单时就把活跃库位**冻结**进 scope_config。
|
||
# 必须在创建会话这一刻算好并落库 —— all-items 与 generate-missing 稍后都要
|
||
# 读同一份范围；若各自实时计算，两次调用之间库位活跃度变化会导致范围漂移，
|
||
# 结束盘点时就会把「开单时在范围内、比对时已掉出范围」的库存误判成盘亏。
|
||
# ★ 抽盘：范围由**前端**决定（系统推荐 + 人工在库位树上微调后提交），
|
||
# 后端只做校验与归一化，不再自行计算 —— 否则用户手改的勾选会被覆盖。
|
||
if scope_type == STOCKTAKE_SCOPE_ACTIVE:
|
||
raw_locs = scope_config.get('locations')
|
||
if not isinstance(raw_locs, list):
|
||
return jsonify({
|
||
"message": "抽盘必须通过 scope_config.locations 提交库位列表（可先调 /stocktake/recommend-locations 拿推荐）"
|
||
}), 400
|
||
|
||
# 归一化：去空白、去重、保序
|
||
clean_locs, seen = [], set()
|
||
for x in raw_locs:
|
||
s = str(x).strip()
|
||
if s and s not in seen:
|
||
seen.add(s)
|
||
clean_locs.append(s)
|
||
|
||
if not clean_locs:
|
||
return jsonify({"message": "抽盘至少要勾选一个库位"}), 400
|
||
if len(clean_locs) > 2000:
|
||
return jsonify({
|
||
"message": f"单次抽盘最多 2000 个库位，当前 {len(clean_locs)} 个"
|
||
}), 400
|
||
|
||
scope_config = {
|
||
'locations': clean_locs,
|
||
'recommend_days': scope_config.get('recommend_days'),
|
||
'recommend_top_n': scope_config.get('recommend_top_n'),
|
||
'computed_at': beijing_time().strftime('%Y-%m-%d %H:%M:%S'),
|
||
}
|
||
|
||
new_session_id = f"STK-{datetime.now().strftime('%Y%m%d%H%M%S')}-{uuid_module.uuid4().hex[:6]}"
|
||
|
||
try:
|
||
# 先给本公司原有的活跃会话收尾，否则会撞 uq_stocktake_session_one_active
|
||
superseded = StocktakeSession.query.filter_by(
|
||
company_name=company_name, status=STOCKTAKE_STATUS_ACTIVE
|
||
).all()
|
||
for s in superseded:
|
||
s.status = STOCKTAKE_STATUS_FINISHED
|
||
s.finished_at = beijing_time()
|
||
|
||
db.session.add(StocktakeSession(
|
||
session_id=new_session_id,
|
||
company_name=company_name,
|
||
mode=mode,
|
||
scope_type=scope_type,
|
||
scope_config=scope_config,
|
||
status=STOCKTAKE_STATUS_ACTIVE,
|
||
created_by=_normalize_user_id(),
|
||
))
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
"message": "已开启新盘点会话（历史草稿保留）",
|
||
"session_id": new_session_id,
|
||
"company_name": company_name,
|
||
"mode": mode,
|
||
"scope_type": scope_type,
|
||
"superseded_count": len(superseded),
|
||
"cleared_count": 0
|
||
}), 200
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
# --- 盘点结束与差异报告 ---
|
||
|
||
@bp.route('/finish', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def finish_stocktake():
|
||
"""
|
||
结束盘点
|
||
直接返回成功，前端会跳转到差异列表
|
||
草稿数据保留在表中
|
||
"""
|
||
return jsonify({
|
||
"message": "盘点已结束",
|
||
"code": 200
|
||
}), 200
|
||
|
||
|
||
@bp.route('/variance-report', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_variance_report():
|
||
"""
|
||
获取盘点差异报告
|
||
返回所有有差异的记录（diff_qty != 0）
|
||
"""
|
||
session_id = request.args.get('session_id')
|
||
# ★ 公司隔离：普通用户只能看到本公司的差异（超管/跨域不过滤）
|
||
company_name = get_current_company_filter()
|
||
|
||
try:
|
||
query = StocktakeDraft.query
|
||
|
||
if company_name is not None:
|
||
query = query.filter_by(company_name=company_name)
|
||
|
||
if session_id:
|
||
query = query.filter_by(session_id=session_id)
|
||
|
||
# 只返回有差异的记录
|
||
drafts = query.filter(StocktakeDraft.diff_qty != 0).order_by(
|
||
StocktakeDraft.scan_time.desc(),
|
||
StocktakeDraft.diff_qty.desc()
|
||
).all()
|
||
|
||
# 补充库存详情
|
||
result = []
|
||
for draft in drafts:
|
||
draft_dict = draft.to_dict()
|
||
|
||
# 获取库存详情
|
||
if draft.stock_id and draft.source_table:
|
||
stock = get_stock_record(draft.source_table, draft.stock_id)
|
||
if stock:
|
||
draft_dict['stock_name'] = getattr(stock, 'material_name', None) or \
|
||
getattr(stock, 'product_name', None) or ''
|
||
draft_dict['stock_spec'] = getattr(stock, 'spec_model', '') or \
|
||
getattr(stock, 'standard', '') or ''
|
||
draft_dict['stock_location'] = getattr(stock, 'warehouse_location', '') or ''
|
||
draft_dict['stock_unit'] = getattr(stock, 'unit', '个')
|
||
|
||
result.append(draft_dict)
|
||
|
||
return jsonify({
|
||
"list": result,
|
||
"total": len(result)
|
||
}), 200
|
||
except Exception as e:
|
||
print(f"Error: {e}")
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
# --- 单条库存调整 (手动平账) ---
|
||
|
||
@bp.route('/adjust', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def adjust_stock():
|
||
"""
|
||
单条库存调整接口
|
||
接收指定的草稿 ID，执行以下操作：
|
||
1. 根据 diff_qty 调整库存 (stock_quantity 和 available_quantity)
|
||
2. 生成流水账记录 (盘盈入库 / 盘亏出库)
|
||
3. 标记草稿为 is_processed=True
|
||
|
||
支持两种模式：
|
||
- 有草稿模式：通过 draft_id 或 stock_id+source_table 查找草稿
|
||
- 无草稿模式：直接传入 stock_id + diff_qty + source_table（未扫码直接盘亏）
|
||
"""
|
||
data = request.json
|
||
draft_id = data.get('draft_id')
|
||
stock_id = data.get('stock_id')
|
||
diff_qty = data.get('diff_qty')
|
||
source_table = data.get('source_table')
|
||
operator_name = data.get('operator_name', 'System')
|
||
remark = data.get('remark', '')
|
||
|
||
if not draft_id and not stock_id:
|
||
return jsonify({"message": "draft_id 或 stock_id 不能同时为空"}), 400
|
||
|
||
try:
|
||
# ★ 公司隔离：平账会写库存，绝不允许命中其他公司的草稿
|
||
company_name = get_current_company_filter()
|
||
|
||
# 1. 尝试获取草稿
|
||
draft = StocktakeDraft.query.get(draft_id) if draft_id else None
|
||
if draft is not None and company_name is not None and draft.company_name != company_name:
|
||
# draft_id 属于其他公司 → 视为未命中，走后续兜底/无草稿分支
|
||
draft = None
|
||
if not draft and stock_id and source_table:
|
||
draft_query = StocktakeDraft.query.filter_by(
|
||
stock_id=stock_id,
|
||
source_table=source_table
|
||
)
|
||
if company_name is not None:
|
||
draft_query = draft_query.filter_by(company_name=company_name)
|
||
draft = draft_query.first()
|
||
elif not draft and stock_id:
|
||
draft_query = StocktakeDraft.query.filter_by(stock_id=stock_id)
|
||
if company_name is not None:
|
||
draft_query = draft_query.filter_by(company_name=company_name)
|
||
draft = draft_query.first()
|
||
|
||
# 2. 核心逻辑分支
|
||
if draft:
|
||
# 有草稿模式
|
||
stock_id = draft.stock_id
|
||
source_table = draft.source_table
|
||
diff_qty = float(draft.diff_qty)
|
||
else:
|
||
# 无草稿模式（未扫码直接盘亏）
|
||
if diff_qty is None or source_table is None or not stock_id:
|
||
return jsonify({"message": "未扫码物资平账缺失必要参数（需提供 diff_qty 和 source_table）"}), 400
|
||
diff_qty = float(diff_qty)
|
||
|
||
# 3. 获取并校验真实的库存记录 — ★ 修复并发：使用悲观锁防止 TOCTOU
|
||
stock = get_stock_record(source_table, stock_id, for_update=True)
|
||
if not stock:
|
||
return jsonify({"message": "平账失败：物理库存记录已不存在"}), 404
|
||
|
||
# 4. 计算调整
|
||
if diff_qty > 0:
|
||
# 盘盈：增加库存
|
||
new_stock_qty = float(stock.stock_quantity or 0) + diff_qty
|
||
new_avail_qty = float(stock.available_quantity or 0) + diff_qty
|
||
action_type = '盘盈入库'
|
||
elif diff_qty < 0:
|
||
# 盘亏：减少库存
|
||
abs_diff = abs(diff_qty)
|
||
current_avail = float(stock.available_quantity or 0)
|
||
if current_avail < abs_diff:
|
||
return jsonify({
|
||
"message": f"可用库存不足，当前可用: {current_avail}，需要减少: {abs_diff}"
|
||
}), 400
|
||
|
||
new_stock_qty = float(stock.stock_quantity or 0) - abs_diff
|
||
new_avail_qty = current_avail - abs_diff
|
||
action_type = '盘亏出库'
|
||
else:
|
||
return jsonify({"message": "差异为0，无需调整"}), 400
|
||
|
||
# 5. 执行库存调整
|
||
stock.stock_quantity = new_stock_qty
|
||
stock.available_quantity = new_avail_qty
|
||
|
||
# 6. 生成流水账记录
|
||
from app.models.outbound import TransOutbound
|
||
|
||
# 生成唯一单号
|
||
adj_no_suffix = draft.id if draft else f"MANUAL-{datetime.now().strftime('%Y%m%d%H%M%S')}"
|
||
trans_record = TransOutbound(
|
||
outbound_no=f"STKADJ-{datetime.now().strftime('%Y%m%d%H%M%S')}-{adj_no_suffix}",
|
||
sku=stock.sku,
|
||
source_table=source_table,
|
||
stock_id=stock_id,
|
||
barcode=getattr(stock, 'barcode', ''),
|
||
quantity=abs(diff_qty),
|
||
unit_price=getattr(stock, 'pre_tax_unit_price', 0) or getattr(stock, 'manual_cost', 0) or 0,
|
||
outbound_type=action_type, # 盘盈入库 / 盘亏出库
|
||
consumer_name='盘点调整',
|
||
operator_name=operator_name,
|
||
remark=f"{action_type} - 盘点差异调整，备注: {remark}",
|
||
outbound_time=datetime.now()
|
||
)
|
||
db.session.add(trans_record)
|
||
|
||
# 7. 删除草稿记录（仅在有草稿时）
|
||
if draft:
|
||
db.session.delete(draft)
|
||
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
"message": f"{action_type}成功",
|
||
"action_type": action_type,
|
||
"diff_qty": diff_qty,
|
||
"new_stock_qty": new_stock_qty,
|
||
"new_avail_qty": new_avail_qty,
|
||
"draft_id": draft_id if draft_id else (draft.id if draft else None)
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
print(f"Adjust Stock Error: {e}")
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
@bp.route('/borrowed-quantities', methods=['POST'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_borrowed_quantities():
|
||
"""批量获取借出未还数量"""
|
||
data = request.json.get('items', [])
|
||
result = {}
|
||
for item in data:
|
||
source = item.get('source_table')
|
||
stock_id = item.get('stock_id')
|
||
if source and stock_id is not None:
|
||
qty = TransBorrow.get_borrowed_quantity(source, stock_id)
|
||
result[f"{source}_{stock_id}"] = qty
|
||
return jsonify(result), 200
|
||
|
||
|
||
# --- 打印接口 ---
|
||
|
||
@bp.route('/print/selection', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def print_selection():
|
||
try:
|
||
data = request.json
|
||
items = data.get('items', [])
|
||
if not items: return jsonify({"message": "未选择任何物品"}), 400
|
||
printer = NetworkPrintService()
|
||
success, msg = printer.print_outbound_selection(items)
|
||
return jsonify({"message": "打印指令已发送" if success else msg}), 200 if success else 500
|
||
except Exception as e:
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
@bp.route('/print/stocktake', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def print_stocktake():
|
||
try:
|
||
data = request.json
|
||
printer = NetworkPrintService()
|
||
success, msg = printer.print_stocktake_report(data)
|
||
return jsonify({"message": "盘点报告已发送" if success else msg}), 200 if success else 500
|
||
except Exception as e:
|
||
return jsonify({"message": str(e)}), 500
|
||
|
||
|
||
@bp.route('/export-stocktake', methods=['GET'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def export_stocktake():
|
||
"""
|
||
导出盘点报告 Excel
|
||
包含3个Sheet:
|
||
1. 盘点差异明细 (diff_qty != 0)
|
||
2. 账实相符明细 (diff_qty == 0)
|
||
3. 外借在用资产明细 (未归还的借出记录)
|
||
4. 未盘点明细(疑似漏盘)
|
||
"""
|
||
try:
|
||
# ★ 获取 session_id 参数，用于过滤当前会话的扫描记录
|
||
session_id = request.args.get('session_id', '', type=str)
|
||
# ★ 公司隔离：导出内容限定在当前用户所属公司
|
||
company_name = get_current_company_filter()
|
||
|
||
# ★ 盲盘保护：会话仍在进行中（active）且为盲盘时，报表里不得出现账面数与差异。
|
||
# 会话一旦 finished 即解锁 —— 盘点结束后再核对差异是正常流程，
|
||
# 否则报告本身就没法用了。
|
||
_sess = StocktakeSession.query.filter_by(session_id=session_id).first() if session_id else None
|
||
blind_locked = bool(
|
||
_sess
|
||
and _sess.status == STOCKTAKE_STATUS_ACTIVE
|
||
and _sess.mode == STOCKTAKE_MODE_BLIND
|
||
)
|
||
BLIND_BLANK = '—'
|
||
|
||
def _qty(v):
|
||
"""账面数/差异：盲盘锁定期间输出占位符，绝不落真实数值。"""
|
||
return BLIND_BLANK if blind_locked else float(v or 0)
|
||
|
||
# 创建工作簿
|
||
wb = Workbook()
|
||
wb.remove(wb.active)
|
||
|
||
# 定义样式
|
||
header_font = Font(bold=True, size=11, color="FFFFFF")
|
||
header_fill = PatternFill(start_color="4472C4", end_color="4472C4", fill_type="solid")
|
||
header_alignment = Alignment(horizontal="center", vertical="center")
|
||
thin_border = Border(
|
||
left=Side(style='thin'),
|
||
right=Side(style='thin'),
|
||
top=Side(style='thin'),
|
||
bottom=Side(style='thin')
|
||
)
|
||
|
||
def get_material_info(source_table, stock_id):
|
||
"""获取物料基本信息"""
|
||
if source_table == 'stock_buy':
|
||
stock = StockBuy.query.get(stock_id)
|
||
elif source_table == 'stock_semi':
|
||
stock = StockSemi.query.get(stock_id) if StockSemi else None
|
||
elif source_table == 'stock_product':
|
||
stock = StockProduct.query.get(stock_id) if StockProduct else None
|
||
else:
|
||
return {'name': '-', 'sku': '-', 'spec': '-', 'unit': '-', 'location': '-'}
|
||
|
||
if not stock:
|
||
return {'name': '-', 'sku': '-', 'spec': '-', 'unit': '-', 'location': '-'}
|
||
|
||
# 安全获取 sku
|
||
stock_sku = getattr(stock, 'sku', None) or getattr(stock, 'SKU', None) or '-'
|
||
|
||
# 使用 base_id 关联查询物料基础表
|
||
material = None
|
||
base_id = getattr(stock, 'base_id', None)
|
||
if base_id:
|
||
material = MaterialBase.query.get(base_id)
|
||
|
||
# 规格型号：从 MaterialBase 的 spec_model 字段获取
|
||
spec = getattr(material, 'spec_model', None) if material else '-'
|
||
if not spec or spec == '-':
|
||
spec = getattr(stock, 'spec_model', None) or getattr(stock, 'standard', None) or '-'
|
||
|
||
# 库位：从库存表的 warehouse_location 字段获取
|
||
location = getattr(stock, 'warehouse_location', None) or '-'
|
||
|
||
return {
|
||
'name': material.name if material else stock_sku,
|
||
'sku': stock_sku,
|
||
'spec': spec,
|
||
'unit': getattr(stock, 'unit', None) or '个',
|
||
'location': location
|
||
}
|
||
|
||
def get_user_name(user_id):
|
||
return _resolve_user_name(user_id)
|
||
|
||
def to_beijing_time(dt):
|
||
"""直接使用数据库中存储的标准时间（服务器时区已正确）"""
|
||
if not dt:
|
||
return ''
|
||
try:
|
||
if isinstance(dt, str):
|
||
return dt[:19]
|
||
return dt.strftime('%Y-%m-%d %H:%M:%S')
|
||
except:
|
||
return str(dt)[:19]
|
||
|
||
def set_header_row(ws, headers):
|
||
for col, header in enumerate(headers, 1):
|
||
cell = ws.cell(row=1, column=col, value=header)
|
||
cell.font = header_font
|
||
cell.fill = header_fill
|
||
cell.alignment = header_alignment
|
||
cell.border = thin_border
|
||
|
||
# ===== Sheet 1: 盘点全景汇总表 (放在最前面) =====
|
||
ws1 = wb.create_sheet("盘点全景汇总表", 0)
|
||
summary_headers = ["物料名称", "SKU", "规格型号", "库位", "调整后账面数", "实盘数", "差异数", "盘点状态", "盘点人", "盘点时间", "备注"]
|
||
set_header_row(ws1, summary_headers)
|
||
master_row_idx = 2 # 汇总表行计数器
|
||
|
||
# ===== Sheet 2: 盘点差异明细 =====
|
||
ws2 = wb.create_sheet("盘点差异明细")
|
||
diff_headers = ["物料名称", "SKU", "规格型号", "库位", "调整后账面数", "实盘数", "差异数", "盘点人", "盘点时间", "备注"]
|
||
set_header_row(ws2, diff_headers)
|
||
|
||
# 按 SKU 排序：先获取全部数据，再在 Python 中按 SKU 排序
|
||
# ★ 原依赖 /draft/start-new 清空整表，「全部草稿」恰好等价于当前会话；
|
||
# start-new 已改为不删数据，故必须显式按 session_id + 公司过滤，
|
||
# 否则会把历史会话、其他公司的盘点一起导出。
|
||
diff_query = StocktakeDraft.query.filter(StocktakeDraft.diff_qty != 0)
|
||
if session_id:
|
||
diff_query = diff_query.filter(StocktakeDraft.session_id == session_id)
|
||
if company_name is not None:
|
||
diff_query = diff_query.filter(StocktakeDraft.company_name == company_name)
|
||
diff_drafts = diff_query.all()
|
||
diff_drafts_with_sku = []
|
||
for draft in diff_drafts:
|
||
mat_info = get_material_info(draft.source_table, draft.stock_id)
|
||
diff_drafts_with_sku.append((mat_info.get('sku', ''), draft))
|
||
diff_drafts_with_sku.sort(key=lambda x: x[0] if x[0] else '')
|
||
diff_drafts = [d[1] for d in diff_drafts_with_sku]
|
||
|
||
for row_idx, draft in enumerate(diff_drafts, 2):
|
||
mat_info = get_material_info(draft.source_table, draft.stock_id)
|
||
# 写入 Sheet 2 (差异明细)
|
||
ws2.cell(row=row_idx, column=1, value=mat_info['name']).border = thin_border
|
||
ws2.cell(row=row_idx, column=2, value=mat_info['sku']).border = thin_border
|
||
ws2.cell(row=row_idx, column=3, value=mat_info['spec']).border = thin_border
|
||
ws2.cell(row=row_idx, column=4, value=mat_info['location']).border = thin_border
|
||
ws2.cell(row=row_idx, column=5, value=_qty(draft.stock_qty)).border = thin_border
|
||
ws2.cell(row=row_idx, column=6, value=float(draft.quantity or 0)).border = thin_border
|
||
ws2.cell(row=row_idx, column=7, value=_qty(draft.diff_qty)).border = thin_border
|
||
ws2.cell(row=row_idx, column=8, value=get_user_name(draft.user_id)).border = thin_border
|
||
ws2.cell(row=row_idx, column=9, value=to_beijing_time(draft.scan_time)).border = thin_border
|
||
ws2.cell(row=row_idx, column=10, value=draft.remark or '').border = thin_border
|
||
# 同时写入 Sheet 1 (汇总表)
|
||
ws1.cell(row=master_row_idx, column=1, value=mat_info['name']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=2, value=mat_info['sku']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=3, value=mat_info['spec']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=4, value=mat_info['location']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=5, value=_qty(draft.stock_qty)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=6, value=float(draft.quantity or 0)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=7, value=_qty(draft.diff_qty)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=8, value="有差异").border = thin_border
|
||
ws1.cell(row=master_row_idx, column=9, value=get_user_name(draft.user_id)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=10, value=to_beijing_time(draft.scan_time)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=11, value=draft.remark or '').border = thin_border
|
||
master_row_idx += 1
|
||
|
||
# ===== Sheet 3: 账实相符明细 =====
|
||
ws3 = wb.create_sheet("账实相符明细")
|
||
normal_headers = ["物料名称", "SKU", "规格型号", "库位", "调整后账面数", "实盘数", "差异数", "盘点人", "盘点时间", "备注"]
|
||
set_header_row(ws3, normal_headers)
|
||
|
||
# 按 SKU 排序
|
||
# ★ 同上：显式按 session_id + 公司过滤
|
||
normal_query = StocktakeDraft.query.filter(StocktakeDraft.diff_qty == 0)
|
||
if session_id:
|
||
normal_query = normal_query.filter(StocktakeDraft.session_id == session_id)
|
||
if company_name is not None:
|
||
normal_query = normal_query.filter(StocktakeDraft.company_name == company_name)
|
||
normal_drafts = normal_query.all()
|
||
normal_drafts_with_sku = []
|
||
for draft in normal_drafts:
|
||
mat_info = get_material_info(draft.source_table, draft.stock_id)
|
||
normal_drafts_with_sku.append((mat_info.get('sku', ''), draft))
|
||
normal_drafts_with_sku.sort(key=lambda x: x[0] if x[0] else '')
|
||
normal_drafts = [d[1] for d in normal_drafts_with_sku]
|
||
|
||
for row_idx, draft in enumerate(normal_drafts, 2):
|
||
mat_info = get_material_info(draft.source_table, draft.stock_id)
|
||
# 写入 Sheet 3 (账实相符)
|
||
ws3.cell(row=row_idx, column=1, value=mat_info['name']).border = thin_border
|
||
ws3.cell(row=row_idx, column=2, value=mat_info['sku']).border = thin_border
|
||
ws3.cell(row=row_idx, column=3, value=mat_info['spec']).border = thin_border
|
||
ws3.cell(row=row_idx, column=4, value=mat_info['location']).border = thin_border
|
||
ws3.cell(row=row_idx, column=5, value=_qty(draft.stock_qty)).border = thin_border
|
||
ws3.cell(row=row_idx, column=6, value=float(draft.quantity or 0)).border = thin_border
|
||
ws3.cell(row=row_idx, column=7, value=_qty(draft.diff_qty)).border = thin_border
|
||
ws3.cell(row=row_idx, column=8, value=get_user_name(draft.user_id)).border = thin_border
|
||
ws3.cell(row=row_idx, column=9, value=to_beijing_time(draft.scan_time)).border = thin_border
|
||
ws3.cell(row=row_idx, column=10, value=draft.remark or '').border = thin_border
|
||
# 同时写入 Sheet 1 (汇总表)
|
||
ws1.cell(row=master_row_idx, column=1, value=mat_info['name']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=2, value=mat_info['sku']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=3, value=mat_info['spec']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=4, value=mat_info['location']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=5, value=_qty(draft.stock_qty)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=6, value=float(draft.quantity or 0)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=7, value=_qty(draft.diff_qty)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=8, value="正常").border = thin_border
|
||
ws1.cell(row=master_row_idx, column=9, value=get_user_name(draft.user_id)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=10, value=to_beijing_time(draft.scan_time)).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=11, value=draft.remark or '').border = thin_border
|
||
master_row_idx += 1
|
||
|
||
# ===== Sheet 4: 外借在用资产明细 =====
|
||
ws4 = wb.create_sheet("外借在用资产明细")
|
||
borrow_headers = ["借出单号", "借用人", "物料名称", "SKU", "规格型号", "借出总数", "已还数量", "待还数量", "借出时间", "预计归还时间"]
|
||
set_header_row(ws4, borrow_headers)
|
||
|
||
# 查询未归还的借出记录
|
||
unreturned_borrows = TransBorrow.query.filter(TransBorrow.is_returned == False).all()
|
||
for row_idx, borrow in enumerate(unreturned_borrows, 2):
|
||
mat_info = get_material_info(borrow.source_table, borrow.stock_id)
|
||
total_qty = float(borrow.quantity or 0)
|
||
returned_qty = float(borrow.returned_quantity or 0)
|
||
pending_qty = total_qty - returned_qty
|
||
|
||
ws4.cell(row=row_idx, column=1, value=borrow.borrow_no or '').border = thin_border
|
||
ws4.cell(row=row_idx, column=2, value=borrow.borrower_name or '').border = thin_border
|
||
ws4.cell(row=row_idx, column=3, value=mat_info['name']).border = thin_border
|
||
ws4.cell(row=row_idx, column=4, value=mat_info['sku']).border = thin_border
|
||
ws4.cell(row=row_idx, column=5, value=mat_info['spec']).border = thin_border
|
||
ws4.cell(row=row_idx, column=6, value=total_qty).border = thin_border
|
||
ws4.cell(row=row_idx, column=7, value=returned_qty).border = thin_border
|
||
ws4.cell(row=row_idx, column=8, value=pending_qty).border = thin_border
|
||
ws4.cell(row=row_idx, column=9, value=to_beijing_time(borrow.borrow_time)).border = thin_border
|
||
ws4.cell(row=row_idx, column=10, value='无限期' if not borrow.expected_return_time else to_beijing_time(borrow.expected_return_time)).border = thin_border
|
||
|
||
# ===== Sheet 5: 未盘点明细(疑似漏盘) =====
|
||
# 逻辑：获取已盘点的集合，遍历库存表，找出未盘点且有库存的物资
|
||
ws5 = wb.create_sheet("未盘点明细(疑似漏盘)")
|
||
unscanned_headers = ["物料名称", "SKU", "规格型号", "库位", "批号", "调整后账面数", "实盘数", "差异数", "状态"]
|
||
set_header_row(ws5, unscanned_headers)
|
||
|
||
# 获取已盘点的 (source_table, stock_id) 集合
|
||
# ★ 修复：只查询当前 session_id 的扫描记录，避免历史记录干扰
|
||
scanned_query = StocktakeDraft.query
|
||
if session_id:
|
||
scanned_query = scanned_query.filter_by(session_id=session_id)
|
||
# ★ 公司隔离：无论是否传 session_id，都不得跨公司
|
||
if company_name is not None:
|
||
scanned_query = scanned_query.filter_by(company_name=company_name)
|
||
session_drafts = scanned_query.all()
|
||
scanned_set = {(d.source_table, d.stock_id) for d in session_drafts}
|
||
|
||
# ★ 性能优化：批量预取所有未还借用的聚合数量
|
||
# 单条 GROUP BY 查询替代循环内逐条 get_borrowed_qty() N+1
|
||
borrow_rows = db.session.query(
|
||
TransBorrow.source_table,
|
||
TransBorrow.stock_id,
|
||
db.func.sum(db.func.coalesce(TransBorrow.quantity, 0) - db.func.coalesce(TransBorrow.returned_quantity, 0)).label('pending')
|
||
).filter(
|
||
TransBorrow.is_returned == False
|
||
).group_by(
|
||
TransBorrow.source_table, TransBorrow.stock_id
|
||
).all()
|
||
borrow_map = {(r.source_table, r.stock_id): float(r.pending or 0) for r in borrow_rows}
|
||
|
||
unscanned_items = []
|
||
|
||
# ★ 修复 N+1 查询：使用 joinedload 预加载 base 关系，同时过滤 stock_quantity > 0
|
||
for stock in _filter_by_company(StockBuy.query, StockBuy, company_name).filter(StockBuy.stock_quantity > 0).options(joinedload(StockBuy.base)).all():
|
||
key = ('stock_buy', stock.id)
|
||
if key in scanned_set:
|
||
continue
|
||
# ★ 扣除外借数量：O(1) 字典查找替代逐条 TransBorrow 查询
|
||
borrowed_qty = borrow_map.get(key, 0)
|
||
stock_qty = float(stock.stock_quantity or 0)
|
||
expected_qty = stock_qty - borrowed_qty
|
||
if expected_qty > 0:
|
||
# ★ 直接使用预加载的 base 关系，避免额外查询
|
||
material = stock.base
|
||
# ★ 安全提取批号/序列号：使用 getattr 降级链
|
||
batch_sn = getattr(stock, 'batch_number', None) or getattr(stock, 'sn', None) or getattr(stock, 'serial_number', None) or '-'
|
||
mat_info = {
|
||
'name': material.name if material else '-',
|
||
'sku': getattr(stock, 'sku', None) or '-',
|
||
'spec': getattr(material, 'spec_model', None) if material else '-',
|
||
'location': getattr(stock, 'warehouse_location', None) or '-',
|
||
'batch_no': batch_sn
|
||
}
|
||
unscanned_items.append({
|
||
'name': mat_info['name'],
|
||
'sku': mat_info['sku'],
|
||
'spec': mat_info['spec'],
|
||
'location': mat_info['location'],
|
||
'batch_no': mat_info['batch_no'],
|
||
'stock_qty': expected_qty,
|
||
'actual_qty': 0,
|
||
'diff_qty': -expected_qty,
|
||
'status': '未盘点'
|
||
})
|
||
|
||
# 遍历 StockSemi
|
||
if StockSemi:
|
||
for stock in _filter_by_company(StockSemi.query, StockSemi, company_name).filter(StockSemi.stock_quantity > 0).options(joinedload(StockSemi.base)).all():
|
||
key = ('stock_semi', stock.id)
|
||
if key in scanned_set:
|
||
continue
|
||
borrowed_qty = borrow_map.get(key, 0)
|
||
stock_qty = float(stock.stock_quantity or 0)
|
||
expected_qty = stock_qty - borrowed_qty
|
||
if expected_qty > 0:
|
||
# ★ 直接使用预加载的 base 关系，避免额外查询
|
||
material = stock.base
|
||
# ★ 安全提取批号/序列号：使用 getattr 降级链
|
||
batch_sn = getattr(stock, 'batch_number', None) or getattr(stock, 'sn', None) or getattr(stock, 'serial_number', None) or '-'
|
||
mat_info = {
|
||
'name': material.name if material else '-',
|
||
'sku': getattr(stock, 'sku', None) or '-',
|
||
'spec': getattr(material, 'spec_model', None) if material else '-',
|
||
'location': getattr(stock, 'warehouse_location', None) or '-',
|
||
'batch_no': batch_sn
|
||
}
|
||
unscanned_items.append({
|
||
'name': mat_info['name'],
|
||
'sku': mat_info['sku'],
|
||
'spec': mat_info['spec'],
|
||
'location': mat_info['location'],
|
||
'batch_no': mat_info['batch_no'],
|
||
'stock_qty': expected_qty,
|
||
'actual_qty': 0,
|
||
'diff_qty': -expected_qty,
|
||
'status': '未盘点'
|
||
})
|
||
|
||
# 遍历 StockProduct
|
||
if StockProduct:
|
||
for stock in _filter_by_company(StockProduct.query, StockProduct, company_name).filter(StockProduct.stock_quantity > 0).options(joinedload(StockProduct.base)).all():
|
||
key = ('stock_product', stock.id)
|
||
if key in scanned_set:
|
||
continue
|
||
stock_qty = float(stock.stock_quantity or 0)
|
||
if stock_qty <= 0:
|
||
continue
|
||
borrowed_qty = borrow_map.get(key, 0)
|
||
expected_qty = stock_qty - borrowed_qty
|
||
if expected_qty > 0:
|
||
# ★ 直接使用预加载的 base 关系，避免额外查询
|
||
material = stock.base
|
||
# ★ 安全提取批号/序列号：使用 getattr 降级链 (成品可能无此字段)
|
||
batch_sn = getattr(stock, 'batch_number', None) or getattr(stock, 'sn', None) or getattr(stock, 'serial_number', None) or '-'
|
||
mat_info = {
|
||
'name': material.name if material else '-',
|
||
'sku': getattr(stock, 'sku', None) or '-',
|
||
'spec': getattr(material, 'spec_model', None) if material else '-',
|
||
'location': getattr(stock, 'warehouse_location', None) or '-',
|
||
'batch_no': batch_sn
|
||
}
|
||
unscanned_items.append({
|
||
'name': mat_info['name'],
|
||
'sku': mat_info['sku'],
|
||
'spec': mat_info['spec'],
|
||
'location': mat_info['location'],
|
||
'batch_no': mat_info['batch_no'],
|
||
'stock_qty': expected_qty,
|
||
'actual_qty': 0,
|
||
'diff_qty': -expected_qty,
|
||
'status': '未盘点'
|
||
})
|
||
|
||
# 写入未盘点明细
|
||
for row_idx, item in enumerate(unscanned_items, 2):
|
||
# 写入 Sheet 5 (未盘点明细)
|
||
ws5.cell(row=row_idx, column=1, value=item['name']).border = thin_border
|
||
ws5.cell(row=row_idx, column=2, value=item['sku']).border = thin_border
|
||
ws5.cell(row=row_idx, column=3, value=item['spec']).border = thin_border
|
||
ws5.cell(row=row_idx, column=4, value=item['location']).border = thin_border
|
||
ws5.cell(row=row_idx, column=5, value=item.get('batch_no', '-')).border = thin_border # ★ 批号
|
||
ws5.cell(row=row_idx, column=6, value=_qty(item['stock_qty'])).border = thin_border
|
||
ws5.cell(row=row_idx, column=7, value=float(item['actual_qty'])).border = thin_border
|
||
ws5.cell(row=row_idx, column=8, value=_qty(item['diff_qty'])).border = thin_border
|
||
ws5.cell(row=row_idx, column=9, value=item['status']).border = thin_border
|
||
# 同时写入 Sheet 1 (汇总表) - 盘点人和时间留空
|
||
ws1.cell(row=master_row_idx, column=1, value=item['name']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=2, value=item['sku']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=3, value=item['spec']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=4, value=item['location']).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=5, value=_qty(item['stock_qty'])).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=6, value=float(item['actual_qty'])).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=7, value=_qty(item['diff_qty'])).border = thin_border
|
||
ws1.cell(row=master_row_idx, column=8, value="未盘点").border = thin_border
|
||
ws1.cell(row=master_row_idx, column=9, value="").border = thin_border
|
||
ws1.cell(row=master_row_idx, column=10, value="").border = thin_border
|
||
master_row_idx += 1
|
||
|
||
# 调整列宽
|
||
for ws in [ws1, ws2, ws3, ws4, ws5]:
|
||
for col in ws.columns:
|
||
max_length = 0
|
||
col_letter = col[0].column_letter
|
||
for cell in col:
|
||
try:
|
||
if len(str(cell.value)) > max_length:
|
||
max_length = len(str(cell.value))
|
||
except:
|
||
pass
|
||
ws.column_dimensions[col_letter].width = min(max_length + 2, 30)
|
||
|
||
# 生成文件
|
||
output = io.BytesIO()
|
||
wb.save(output)
|
||
output.seek(0)
|
||
|
||
filename = f"盘点报告_{datetime.now().strftime('%Y%m%d_%H%M%S')}.xlsx"
|
||
return send_file(
|
||
output,
|
||
mimetype='application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
|
||
as_attachment=True,
|
||
download_name=filename
|
||
)
|
||
except Exception as e:
|
||
print(f"Export Stocktake Error: {e}")
|
||
import traceback
|
||
traceback.print_exc()
|
||
return jsonify({"message": f"导出失败: {str(e)}"}), 500
|
||
|
||
|
||
# --------------------------------------------------------
|
||
# 生成漏盘数据 - 将未扫描的库存标记为全额盘亏
|
||
# POST /api/v1/inbound/stocktake/generate-missing
|
||
# --------------------------------------------------------
|
||
@bp.route('/stocktake/generate-missing', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def generate_missing_stocktake():
|
||
"""
|
||
生成漏盘数据（幂等性）：
|
||
找出所有真实库存 > 0，但未被当前会话盘点扫描到的物料，
|
||
自动生成盘点草稿，标记为盘亏（实盘=0，差异=-库存数）
|
||
|
||
幂等性保护：在重新计算差集之前，先删除当前 session 下所有
|
||
由系统自动生成的漏盘记录（quantity==0, user_id=='system'），
|
||
保证该接口多次调用结果一致。
|
||
"""
|
||
try:
|
||
# ★ 获取 session_id 参数，用于隔离当前会话
|
||
data = request.get_json() or {}
|
||
session_id = data.get('session_id', '')
|
||
|
||
if not session_id:
|
||
return jsonify({'code': 400, 'msg': '缺少 session_id 参数'}), 400
|
||
|
||
# ★ 公司隔离：漏盘比对只在当前公司的库存与草稿范围内进行
|
||
company_name = get_current_company_filter()
|
||
|
||
# ★ 幂等性保护：先删除当前 session 下系统自动生成的漏盘记录
|
||
# 特征：user_id == 'system' (表示由系统自动生成)
|
||
# 改为对象级删除以触发审计事件
|
||
system_query = StocktakeDraft.query.filter(
|
||
StocktakeDraft.session_id == session_id,
|
||
StocktakeDraft.user_id == 'system'
|
||
)
|
||
if company_name is not None:
|
||
system_query = system_query.filter(StocktakeDraft.company_name == company_name)
|
||
system_records = system_query.all()
|
||
deleted_count = len(system_records)
|
||
for rec in system_records:
|
||
db.session.delete(rec)
|
||
if deleted_count > 0:
|
||
db.session.commit()
|
||
print(f"[generate_missing] 已清理 {deleted_count} 条历史漏盘记录")
|
||
|
||
# 1. 获取当前会话已有盘点记录的 (source_table, stock_id) 集合
|
||
existing_query = db.session.query(
|
||
StocktakeDraft.source_table,
|
||
StocktakeDraft.stock_id
|
||
).filter(StocktakeDraft.session_id == session_id)
|
||
if company_name is not None:
|
||
existing_query = existing_query.filter(StocktakeDraft.company_name == company_name)
|
||
existing_records = existing_query.distinct().all()
|
||
|
||
scanned_keys = set()
|
||
for src_table, stock_id in existing_records:
|
||
if stock_id:
|
||
scanned_keys.add((src_table, stock_id))
|
||
|
||
# 2. 获取所有真实库存 > 0 的记录
|
||
#
|
||
# ★★★ 抽盘范围（本功能最关键的一处）★★★
|
||
# 漏盘比对只针对**范围内**的库存。范围取自会话 scope_config 里开单时
|
||
# 冻结的库位清单，与 all-items / merged-list 完全同源。
|
||
# 若此过滤缺失或与其他接口不同源，结束盘点会把抽盘范围外的全部未盘
|
||
# 库存批量生成为盘亏记录 —— 直接污染库存账。
|
||
_scope_type, scope_locations = _get_session_scope(session_id)
|
||
|
||
def _in_scope(query, model):
|
||
if scope_locations:
|
||
query = query.filter(model.warehouse_location.in_(scope_locations))
|
||
return query
|
||
|
||
all_stock = []
|
||
|
||
# 采购库存
|
||
for item in _in_scope(_filter_by_company(StockBuy.query, StockBuy, company_name), StockBuy).filter(StockBuy.stock_quantity > 0).all():
|
||
all_stock.append({
|
||
'source_table': 'stock_buy',
|
||
'stock_id': item.id,
|
||
'base_id': item.base_id,
|
||
'stock_qty': float(item.stock_quantity or 0)
|
||
})
|
||
|
||
# 半成品库存
|
||
if StockSemi:
|
||
for item in _in_scope(_filter_by_company(StockSemi.query, StockSemi, company_name), StockSemi).filter(StockSemi.stock_quantity > 0).all():
|
||
all_stock.append({
|
||
'source_table': 'stock_semi',
|
||
'stock_id': item.id,
|
||
'base_id': item.base_id,
|
||
'stock_qty': float(item.stock_quantity or 0)
|
||
})
|
||
|
||
# 成品库存
|
||
if StockProduct:
|
||
for item in _in_scope(_filter_by_company(StockProduct.query, StockProduct, company_name), StockProduct).filter(StockProduct.stock_quantity > 0).all():
|
||
all_stock.append({
|
||
'source_table': 'stock_product',
|
||
'stock_id': item.id,
|
||
'base_id': item.base_id,
|
||
'stock_qty': float(item.stock_quantity or 0)
|
||
})
|
||
|
||
# 3. 找出漏盘记录（库存中有但盘点中没有的）
|
||
missing_count = 0
|
||
for stock in all_stock:
|
||
key = (stock['source_table'], stock['stock_id'])
|
||
if key not in scanned_keys:
|
||
# 生成漏盘草稿
|
||
draft = StocktakeDraft(
|
||
user_id='system', # ★ 标记为系统自动生成，用于幂等性清理
|
||
uuid=f'MISSING-{stock["source_table"]}-{stock["stock_id"]}',
|
||
quantity=0, # 实盘数为0
|
||
scan_time=beijing_time(),
|
||
session_id=session_id, # ★ 使用传入的 session_id
|
||
source_table=stock['source_table'],
|
||
stock_id=stock['stock_id'],
|
||
stock_qty=stock['stock_qty'],
|
||
diff_qty=-stock['stock_qty'], # 差异 = 0 - 库存数 = 负数
|
||
remark='未盘点到，系统自动标记为盘亏',
|
||
company_name=company_name # ★ 公司隔离
|
||
)
|
||
db.session.add(draft)
|
||
missing_count += 1
|
||
|
||
db.session.commit()
|
||
|
||
# ★ 会话收尾：漏盘比对完成即视为该轮盘点结束。
|
||
# 不置为 finished 的话，/draft/active-session 会继续把它当活跃会话返回，
|
||
# 其他 PDA 会「加入」一个已经结束的盘点。
|
||
finished_session = StocktakeSession.query.filter_by(
|
||
session_id=session_id, status=STOCKTAKE_STATUS_ACTIVE
|
||
).first()
|
||
if finished_session:
|
||
finished_session.status = STOCKTAKE_STATUS_FINISHED
|
||
finished_session.finished_at = beijing_time()
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': f'成功生成 {missing_count} 条漏盘记录',
|
||
'data': {'count': missing_count, 'session_finished': bool(finished_session)}
|
||
})
|
||
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'生成漏盘数据失败: {str(e)}'}), 500
|
||
|
||
|
||
# --------------------------------------------------------
|
||
# 盘点物资合并列表（服务端 JOIN draft + stock）
|
||
# GET /api/v1/inbound/stock/draft/merged-list
|
||
# --------------------------------------------------------
|
||
@bp.route('/draft/merged-list', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_draft_merged_list():
|
||
"""
|
||
数据库级分页合并（UNION ALL + LEFT JOIN + LIMIT/OFFSET）。
|
||
不再加载全量库存到 Python 内存，由 PostgreSQL 完成分页。
|
||
"""
|
||
try:
|
||
session_id = request.args.get('session_id', '').strip()
|
||
if not session_id:
|
||
return jsonify({'code': 400, 'msg': 'session_id 不能为空'}), 400
|
||
|
||
keyword = request.args.get('keyword', '').strip().lower()
|
||
status_filter = request.args.get('status_filter', '').strip() # counted / uncounted
|
||
page = max(request.args.get('page', 1, type=int), 1)
|
||
page_size = min(request.args.get('pageSize', 20, type=int), 200)
|
||
|
||
# ★ 公司隔离：盘点基数（库存侧）与已扫草稿（草稿侧）都限定在当前公司。
|
||
# 超管/跨域用户 company_name 为 None，不加任何公司条件。
|
||
company_name = get_current_company_filter()
|
||
company_cond_sd = ' AND sd.company_name = :company' if company_name is not None else ''
|
||
company_cond_bare = ' AND company_name = :company' if company_name is not None else ''
|
||
|
||
# ── 公共 CTE / 子查询片段 ──
|
||
# ★ 0 库存盘盈可见性：账面为 0、但本会话已被扫入的物料也要进明细列表。
|
||
# 否则工人扫到货架上账面为 0 的实物（盘盈）时，「已盘」计数会 +1，
|
||
# 明细里却找不到这一行，看起来像系统丢了数据。
|
||
# 注意条件必须限定在**本会话**的草稿，不能是库容里存在过草稿就放行。
|
||
# ★ 批次/序列号：stock_product 表**没有 batch_number 列**（只有 serial_number），
|
||
# 所以第三个分支必须给 batch_number 补一个空串占位，否则 UNION 两边
|
||
# 列数不齐 / 报 column does not exist。前端据此显示为 '-'。
|
||
union_sql = """
|
||
SELECT id, 'stock_buy' AS source_table, sku,
|
||
stock_quantity AS stock_qty, warehouse_location, base_id,
|
||
COALESCE(batch_number, '') AS batch_number,
|
||
COALESCE(serial_number, '') AS serial_number
|
||
FROM stock_buy
|
||
WHERE stock_quantity > 0
|
||
OR id IN (SELECT sd.stock_id FROM stocktake_draft sd
|
||
WHERE sd.source_table = 'stock_buy' AND sd.session_id = :sid)
|
||
UNION ALL
|
||
SELECT id, 'stock_semi', sku,
|
||
stock_quantity, warehouse_location, base_id,
|
||
COALESCE(batch_number, ''),
|
||
COALESCE(serial_number, '')
|
||
FROM stock_semi
|
||
WHERE stock_quantity > 0
|
||
OR id IN (SELECT sd.stock_id FROM stocktake_draft sd
|
||
WHERE sd.source_table = 'stock_semi' AND sd.session_id = :sid)
|
||
UNION ALL
|
||
SELECT id, 'stock_product', sku,
|
||
stock_quantity, warehouse_location, base_id,
|
||
'' AS batch_number, -- stock_product 无 batch_number 列
|
||
COALESCE(serial_number, '')
|
||
FROM stock_product
|
||
WHERE stock_quantity > 0
|
||
OR id IN (SELECT sd.stock_id FROM stocktake_draft sd
|
||
WHERE sd.source_table = 'stock_product' AND sd.session_id = :sid)
|
||
"""
|
||
|
||
# ── 构建 WHERE 条件 ──
|
||
conditions = []
|
||
params = {'sid': session_id}
|
||
|
||
if company_name is not None:
|
||
conditions.append("mb.company_name = :company")
|
||
params['company'] = company_name
|
||
|
||
# ★ 抽盘范围：与 all-items / generate-missing 读同一份冻结的库位清单。
|
||
# 不加这一条的话，抽屉里仍会列出范围外的物资，与「总品项」对不上。
|
||
_scope_type, scope_locations = _get_session_scope(session_id)
|
||
if scope_locations:
|
||
conditions.append("cs.warehouse_location = ANY(:locations)")
|
||
params['locations'] = scope_locations
|
||
|
||
if keyword:
|
||
conditions.append("(LOWER(cs.sku) LIKE :kw OR LOWER(mb.name) LIKE :kw)")
|
||
params['kw'] = f'%{keyword}%'
|
||
|
||
if status_filter == 'counted':
|
||
conditions.append("COALESCE(sd.quantity, 0) > 0")
|
||
elif status_filter == 'uncounted':
|
||
conditions.append("COALESCE(sd.quantity, 0) <= 0")
|
||
|
||
where_clause = ('WHERE ' + ' AND '.join(conditions)) if conditions else ''
|
||
|
||
# ── COUNT 查询 ──
|
||
count_sql = f"""
|
||
SELECT COUNT(*) FROM (
|
||
{union_sql}
|
||
) cs
|
||
LEFT JOIN material_base mb ON cs.base_id = mb.id
|
||
LEFT JOIN stocktake_draft sd ON sd.source_table = cs.source_table
|
||
AND sd.stock_id = cs.id AND sd.session_id = :sid{company_cond_sd}
|
||
{where_clause}
|
||
"""
|
||
total = db.session.execute(db.text(count_sql), params).scalar()
|
||
|
||
# ── 已扫数量（去重） ──
|
||
scanned_sql = f"""
|
||
SELECT COUNT(DISTINCT (source_table, stock_id))
|
||
FROM stocktake_draft WHERE session_id = :sid{company_cond_bare}
|
||
"""
|
||
# 该语句只引用 :sid / :company，单独构造参数避免夹带未引用的 :kw
|
||
scanned_params = {'sid': session_id}
|
||
if company_name is not None:
|
||
scanned_params['company'] = company_name
|
||
total_scanned = db.session.execute(db.text(scanned_sql), scanned_params).scalar() or 0
|
||
|
||
# ── 数据查询（LIMIT/OFFSET） ──
|
||
offset = (page - 1) * page_size
|
||
data_sql = f"""
|
||
SELECT
|
||
cs.id AS stock_id, cs.source_table, cs.sku,
|
||
cs.batch_number, cs.serial_number,
|
||
cs.stock_qty, cs.warehouse_location,
|
||
mb.name AS mat_name, mb.spec_model AS mat_spec,
|
||
sd.id AS draft_id, sd.quantity AS draft_qty,
|
||
sd.remark AS draft_remark
|
||
FROM (
|
||
{union_sql}
|
||
) cs
|
||
LEFT JOIN material_base mb ON cs.base_id = mb.id
|
||
LEFT JOIN stocktake_draft sd ON sd.source_table = cs.source_table
|
||
AND sd.stock_id = cs.id AND sd.session_id = :sid{company_cond_sd}
|
||
{where_clause}
|
||
ORDER BY cs.sku
|
||
LIMIT :limit OFFSET :offset
|
||
"""
|
||
params['limit'] = page_size
|
||
params['offset'] = offset
|
||
rows = db.session.execute(db.text(data_sql), params).fetchall()
|
||
|
||
# ── 明/盲盘控制：账面数与差异由后端强制决定是否下发 ──
|
||
# ★ Fail-Safe：查不到会话配置时按盲盘处理。宁可让界面少显示两列，
|
||
# 也不能因为会话行缺失就把真实账面数泄漏出去。
|
||
session = StocktakeSession.query.filter_by(session_id=session_id).first()
|
||
is_blind = True if session is None else (session.mode == STOCKTAKE_MODE_BLIND)
|
||
|
||
# ── 组装结果 ──
|
||
items = []
|
||
for row in rows:
|
||
draft_qty = float(row.draft_qty or 0)
|
||
stock_qty = float(row.stock_qty or 0)
|
||
diff_qty = (draft_qty - stock_qty) if row.draft_id else -stock_qty
|
||
|
||
items.append({
|
||
'draft_id': row.draft_id,
|
||
'stock_id': row.stock_id,
|
||
'source_table': row.source_table,
|
||
'uniqueKey': f"{row.source_table}_{row.stock_id}",
|
||
'sku': row.sku or '',
|
||
'batch_number': row.batch_number or '',
|
||
'serial_number': row.serial_number or '',
|
||
'material_name': row.mat_name or '',
|
||
'spec_model': row.mat_spec or '',
|
||
# ★ 盲盘：账面数置空，真实值不得出现在 HTTP 响应里
|
||
'stock_qty': None if is_blind else stock_qty,
|
||
'quantity': draft_qty,
|
||
# ★ 盲盘：差异同样置空 —— diff_qty 由账面数算出，
|
||
# 下发差异等于变相泄漏账面数
|
||
'diff_qty': None if is_blind else round(diff_qty, 4),
|
||
'remark': row.draft_remark or '',
|
||
'warehouse_location': row.warehouse_location or '',
|
||
})
|
||
|
||
return jsonify({
|
||
'code': 200, 'msg': '获取成功',
|
||
'data': {
|
||
'list': items, 'total': total,
|
||
'total_scanned': total_scanned,
|
||
'page': page, 'pageSize': page_size,
|
||
# 前端据此决定表头提示；真正的数据屏蔽已经在上面做完了
|
||
'mode': session.mode if session is not None else STOCKTAKE_MODE_BLIND,
|
||
}
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
current_app.logger.error(f'合并列表查询失败: {str(e)}')
|
||
return jsonify({'code': 500, 'msg': str(e)}), 500
|
||
|
||
|
||
# --------------------------------------------------------
|
||
# 获取应盘物资清单（盘点基数）
|
||
# GET /api/v1/inbound/stock/stocktake/all-items
|
||
# --------------------------------------------------------
|
||
@bp.route('/stocktake/all-items', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def get_all_stocktake_items():
|
||
"""
|
||
获取应盘物资清单（库存 > 0 的物料）— ★ 分页返回，禁止全量
|
||
|
||
性能优化: 原来三次 .all() 全量加载 + 内存排序，库存量大时打开极慢。
|
||
改为: 分页返回 {items(当前页), total(总数), total_scanned(已盘数)}。
|
||
"""
|
||
try:
|
||
keyword = request.args.get('keyword', '', type=str).strip()
|
||
page = max(1, request.args.get('page', 1, type=int))
|
||
pageSize = min(200, max(1, request.args.get('pageSize', 50, type=int)))
|
||
|
||
# ★ 公司隔离：盘点基数只统计本公司库存（超管/跨域不过滤）
|
||
company_name = get_current_company_filter()
|
||
company_cond_bare = ' AND company_name = :company' if company_name is not None else ''
|
||
|
||
# ── 原生 SQL：UNION ALL 三张库存表 + LEFT JOIN material_base，数据库级分页 ──
|
||
# 注意：stock_product 表没有 batch_number 列，故第三个分支直接用 serial_number。
|
||
union_sql = """
|
||
SELECT id, 'stock_buy' AS source_table, sku, barcode,
|
||
stock_quantity AS stock_qty, available_quantity, warehouse_location, base_id,
|
||
COALESCE(batch_number, serial_number, '') AS batch_no
|
||
FROM stock_buy WHERE stock_quantity > 0
|
||
UNION ALL
|
||
SELECT id, 'stock_semi' AS source_table, sku, barcode,
|
||
stock_quantity, available_quantity, warehouse_location, base_id,
|
||
COALESCE(batch_number, serial_number, '') AS batch_no
|
||
FROM stock_semi WHERE stock_quantity > 0
|
||
UNION ALL
|
||
SELECT id, 'stock_product' AS source_table, sku, barcode,
|
||
stock_quantity, available_quantity, warehouse_location, base_id,
|
||
serial_number AS batch_no
|
||
FROM stock_product WHERE stock_quantity > 0
|
||
"""
|
||
|
||
# ── 动态 WHERE（SKU / 物料名 / 规格 模糊搜索）──
|
||
conditions = []
|
||
params = {}
|
||
if company_name is not None:
|
||
conditions.append("mb.company_name = :company")
|
||
params['company'] = company_name
|
||
# ★ 抽盘范围：范围在开单时已冻结进会话 scope_config，这里只读不算，
|
||
# 确保与 generate-missing 用的是同一份库位清单
|
||
_scope_type, scope_locations = _get_session_scope(
|
||
request.args.get('session_id', '', type=str)
|
||
)
|
||
if scope_locations:
|
||
conditions.append("cs.warehouse_location = ANY(:locations)")
|
||
params['locations'] = scope_locations
|
||
if keyword:
|
||
conditions.append("(LOWER(cs.sku) LIKE :kw OR LOWER(mb.name) LIKE :kw OR LOWER(mb.spec_model) LIKE :kw)")
|
||
params['kw'] = f'%{keyword.lower()}%'
|
||
where_clause = ('WHERE ' + ' AND '.join(conditions)) if conditions else ''
|
||
|
||
# 总数（COUNT 聚合，不再全量加载）
|
||
count_sql = f"""
|
||
SELECT COUNT(*) FROM ( {union_sql} ) cs
|
||
LEFT JOIN material_base mb ON mb.id = cs.base_id
|
||
{where_clause}
|
||
"""
|
||
total = db.session.execute(db.text(count_sql), params).scalar() or 0
|
||
|
||
# 数据查询（真正的数据库级 LIMIT/OFFSET 分页）
|
||
offset = (page - 1) * pageSize
|
||
data_sql = f"""
|
||
SELECT cs.id, cs.source_table, cs.sku, cs.barcode, cs.batch_no,
|
||
cs.stock_qty, cs.available_quantity, cs.warehouse_location,
|
||
mb.name AS material_name, mb.spec_model AS spec_model
|
||
FROM ( {union_sql} ) cs
|
||
LEFT JOIN material_base mb ON mb.id = cs.base_id
|
||
{where_clause}
|
||
ORDER BY LOWER(cs.sku)
|
||
LIMIT :limit OFFSET :offset
|
||
"""
|
||
query_params = dict(params)
|
||
query_params['limit'] = pageSize
|
||
query_params['offset'] = offset
|
||
rows = db.session.execute(db.text(data_sql), query_params).fetchall()
|
||
|
||
# ── 组装当前页数据（无 item.base 懒加载 N+1）──
|
||
paged = []
|
||
for row in rows:
|
||
paged.append({
|
||
'id': row.id,
|
||
'sku': row.sku or '',
|
||
'barcode': row.barcode or '',
|
||
'batch_no': row.batch_no or '',
|
||
'material_name': row.material_name or '',
|
||
'spec_model': row.spec_model or '',
|
||
'stock_qty': float(row.stock_qty or 0),
|
||
'available_qty': float(row.available_quantity or 0),
|
||
'source_table': row.source_table,
|
||
'warehouse_location': row.warehouse_location or ''
|
||
})
|
||
|
||
# 统计已盘数量（该 session 下已扫的，SQL COUNT 聚合）
|
||
session_id = request.args.get('session_id', '', type=str)
|
||
total_scanned = 0
|
||
if session_id:
|
||
scanned_sql = f"""
|
||
SELECT COUNT(DISTINCT (source_table, stock_id))
|
||
FROM stocktake_draft WHERE session_id = :sid{company_cond_bare}
|
||
"""
|
||
scanned_params = {'sid': session_id}
|
||
if company_name is not None:
|
||
scanned_params['company'] = company_name
|
||
total_scanned = db.session.execute(
|
||
db.text(scanned_sql), scanned_params
|
||
).scalar() or 0
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'data': {
|
||
'items': paged,
|
||
'total': total,
|
||
'total_scanned': total_scanned,
|
||
'page': page,
|
||
'pageSize': pageSize
|
||
}
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
import traceback
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'获取应盘清单失败: {str(e)}'}), 500
|
||
|
||
|
||
# --------------------------------------------------------
|
||
# 更新盘点实盘数（手动修改）
|
||
# POST /api/v1/inbound/stock/stocktake/update-quantity
|
||
# --------------------------------------------------------
|
||
@bp.route('/stocktake/update-quantity', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def update_stocktake_quantity():
|
||
"""
|
||
更新盘点实盘数
|
||
用于手动修改盘点数量
|
||
"""
|
||
try:
|
||
data = request.json
|
||
stock_id = data.get('stock_id')
|
||
source_table = data.get('source_table')
|
||
session_id = data.get('session_id') # ★ 修复：按会话隔离，防止跨会话误改
|
||
quantity = float(data.get('quantity', 0))
|
||
# 备注为**可选**字段：只有显式传入时才覆盖，避免改实盘数时把备注清空
|
||
remark = data.get('remark', None)
|
||
|
||
if not stock_id or not source_table:
|
||
return jsonify({'code': 400, 'msg': '缺少必要参数'}), 400
|
||
|
||
# ★ 公司隔离：只能改本公司的盘点记录
|
||
company_name = get_current_company_filter()
|
||
|
||
# 查找对应的盘点记录（★ 修复：限定 session_id，避免不同盘点会话相互覆盖）
|
||
query = StocktakeDraft.query.filter_by(
|
||
stock_id=stock_id,
|
||
source_table=source_table
|
||
)
|
||
if session_id:
|
||
query = query.filter_by(session_id=session_id)
|
||
if company_name is not None:
|
||
query = query.filter_by(company_name=company_name)
|
||
draft = query.first()
|
||
|
||
if not draft:
|
||
# 该物料在本会话尚未扫码 → 没有草稿行可改。
|
||
# 前端已把未扫行的实盘数置为不可编辑，这里是兜底（例如页面未刷新、
|
||
# 或有人直接调接口）。刻意**不**在此处补建草稿 —— 一旦允许不扫码
|
||
# 就能填数，扫码这道工序就形同虚设，盘盈盘亏也无从查起。
|
||
return jsonify({
|
||
'code': 404,
|
||
'msg': '该物料尚未扫码，请先扫描条码后再修改实盘数'
|
||
}), 404
|
||
|
||
# 更新数量
|
||
draft.quantity = quantity
|
||
draft.scan_time = beijing_time()
|
||
|
||
# 计算差异（★ 这是写库计算，不是报表输出，绝不能用 _qty —— 那会在盲盘时
|
||
# 返回占位符 '—' 导致减法报错。账面数在这里始终按真实值参与计算。）
|
||
draft.diff_qty = quantity - float(draft.stock_qty or 0)
|
||
|
||
if remark is not None:
|
||
draft.remark = remark.strip() if isinstance(remark, str) else remark
|
||
|
||
db.session.commit()
|
||
|
||
return jsonify({'code': 200, 'msg': '更新成功'}), 200
|
||
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
import traceback
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'更新失败: {str(e)}'}), 500
|
||
|
||
|
||
# ==============================================================================
|
||
# 库存状态变更接口（逆向物流的基础能力）
|
||
# ==============================================================================
|
||
# ★ 为什么需要它
|
||
# 分配器已引入「仅 status='在库' 方能被分配」的硬隔离
|
||
# （见 app/services/inventory_reservation.py::allocatable_filter）。
|
||
# 但在此之前，**全系统没有任何入口**能改写 stock 行的 status —— 状态只能靠
|
||
# 手工改库，于是「坏件退回 / 送修 / 冻结」在系统里没有落点，逆向物流无从谈起。
|
||
# 本接口补上这一环。
|
||
#
|
||
# ★ 阶段二接入预告
|
||
# 退回 / 送修 / 报废流程落地时，应**复用本接口背后的同一条变更路径**
|
||
# （而不是各自复制一份赋值逻辑），以保证「什么状态算可出货」在全系统
|
||
# 只有一处定义。届时可考虑抽成 service 层函数，本路由只做鉴权与解析。
|
||
#
|
||
# ★ 审计留痕
|
||
# stock_buy / stock_semi / stock_product 均在 audit_listener 的白名单内
|
||
# （app/core/audit_listener.py:44-48），因此 status / quality_status 的
|
||
# 变更会由 SQLAlchemy 事件监听器**自动**写入 audit_logs，记录操作人
|
||
# （取自 JWT）、IP、变更前后的值 —— 本接口刻意不手工记账，避免双写。
|
||
# 注意：监听器要求 HTTP 请求上下文，故状态变更必须在请求内直接落库，
|
||
# 不可丢给后台任务，否则会静默失去审计痕迹。
|
||
|
||
@bp.route('/<int:stock_id>/change-status', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
def change_stock_status(stock_id):
|
||
"""
|
||
变更单条库存行的状态（在库 / 冻结 / 不良品）。
|
||
|
||
Body(JSON):
|
||
{
|
||
"source_table": "stock_buy" | "stock_semi" | "stock_product", # 必填
|
||
"status": "在库" | "冻结" | "不良品", # 必填
|
||
"quality_status": "合格" | "不合格" | "待检" # 可选
|
||
}
|
||
|
||
典型用法：
|
||
· 发现坏件 → status='不良品'，从此不再被分配出货
|
||
· 争议/盘点待查 → status='冻结'
|
||
· 维修完成放回池子 → status='在库'
|
||
"""
|
||
data = request.get_json(silent=True) or {}
|
||
|
||
source_table = (data.get('source_table') or '').strip()
|
||
new_status = (data.get('status') or '').strip()
|
||
quality_status = data.get('quality_status')
|
||
|
||
# ---- 1. 参数校验（脏值一律挡在入口，不让它进库）----
|
||
if not source_table or not new_status:
|
||
return jsonify({'code': 400, 'msg': 'source_table 与 status 均为必填'}), 400
|
||
|
||
model = get_stock_model(source_table)
|
||
if model is None:
|
||
return jsonify({
|
||
'code': 400,
|
||
'msg': f'不支持的 source_table: {source_table}，'
|
||
f'仅支持 stock_buy / stock_semi / stock_product',
|
||
}), 400
|
||
|
||
if new_status not in VALID_STOCK_STATUSES:
|
||
return jsonify({
|
||
'code': 400,
|
||
'msg': f'不支持的 status: {new_status}，'
|
||
f'仅支持 {"、".join(VALID_STOCK_STATUSES)}',
|
||
}), 400
|
||
|
||
try:
|
||
# ---- 2. 行锁 + 取行 ----
|
||
# ★ with_for_update 是必须的：本接口会与出库/借库的预占、报废的扣减
|
||
# 并发。不加锁的话「冻结」可能与「扣减」交错 —— 冻完之后该行仍被
|
||
# 扣走并发货，冻结形同虚设。
|
||
row = model.query.with_for_update().get(stock_id)
|
||
if not row:
|
||
return jsonify({
|
||
'code': 404,
|
||
'msg': f'库存记录不存在: {source_table}#{stock_id}',
|
||
}), 404
|
||
|
||
# ---- 3. 多租户隔离：非跨域用户只能动本公司的库存 ----
|
||
# 与分配器的口径一致（分配器按 MaterialBase.company_name 过滤候选行），
|
||
# 否则普通用户可越权冻结他司库存，等于一种拒绝服务。
|
||
company_limit = get_current_company_filter()
|
||
if company_limit is not None:
|
||
base = row.base
|
||
if (company_limit == '__NO_COMPANY__' or base is None
|
||
or (base.company_name or '') != company_limit):
|
||
return jsonify({'code': 403, 'msg': '无权操作其他公司的库存'}), 403
|
||
|
||
# ---- 4. 质量列：按表实际拥有的列写入，缺列时明确报错而非静默丢弃 ----
|
||
# ★ 实测 stock_buy 没有 quality_status 列（只有 inspection_status），
|
||
# 静默忽略会让调用方以为写成功了。
|
||
if quality_status is not None:
|
||
if not hasattr(row, 'quality_status'):
|
||
return jsonify({
|
||
'code': 400,
|
||
'msg': f'{source_table} 没有 quality_status 字段；'
|
||
f'采购件的检验状态请通过入库单的 inspection_status 维护',
|
||
}), 400
|
||
row.quality_status = quality_status
|
||
|
||
old_status = row.status
|
||
old_quality = getattr(row, 'quality_status', None)
|
||
|
||
row.status = new_status
|
||
|
||
# 提交后由 audit_listener 自动记录本次变更（含操作人与前后值）
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': '状态变更成功',
|
||
'data': {
|
||
'source_table': source_table,
|
||
'stock_id': stock_id,
|
||
'sku': row.sku,
|
||
'old_status': old_status,
|
||
'status': row.status,
|
||
'old_quality_status': old_quality,
|
||
'quality_status': getattr(row, 'quality_status', None),
|
||
},
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'状态变更失败: {str(e)}'}), 500
|
||
|
||
|
||
# ==============================================================================
|
||
# 原单退回 & 不良品回库（逆向物流二期）
|
||
# ==============================================================================
|
||
# 架构要点（详见 app/models/transaction.py 的模块注释与
|
||
# db_migrations/phase2_return_and_defective_goods.sql）：
|
||
#
|
||
# · 良品退回 → 加回原库存行（stock_quantity 与 available_quantity 同步加回，
|
||
# 与出库时 restore_then_deduct 的扣减口径严格对称）
|
||
# · 不良品退回 → **完全不动库存表**，转入独立的 trans_defective_goods 在管
|
||
# 台账；修好后按 remaining_qty 部分/整批回库
|
||
#
|
||
# 为什么坏件不进库存表：status 是**行级**属性，质量是**件级**属性。把坏件
|
||
# 加回原行只能整行打不良，而实测 stock_buy 单行最大 4789 件、中位 8 件 ——
|
||
# 退 1 件坏件会让整行良品一起被隔离，是静默的大规模库存损失。
|
||
|
||
|
||
def _lock_source_stock_row(source_table, stock_id):
|
||
"""
|
||
解析并锁定退回目标的**原库存行**。业务不满足即抛 ValueError。
|
||
|
||
三条 Fail-Closed 规则：
|
||
1. source_table 必须是三张库存表之一 —— 维修单等非库存来源没有可退回的行；
|
||
2. 库存行必须仍然存在 —— 入库模块会物理删除库存行（见
|
||
buy/semi/product_service 的 db.session.delete(stock)），实测 1077 条
|
||
出库记录中已有 7 条指向不存在的行；
|
||
3. 调用方拿到行后还需自行做公司隔离与状态校验（见 _assert_company_owns）。
|
||
|
||
★ 为什么必须加锁：本行随后会被加减数量，且与出库/报废/状态变更并发。
|
||
不加锁会出现「读-改-写」丢失更新（lost update）。
|
||
"""
|
||
model = get_stock_model(source_table)
|
||
if model is None:
|
||
raise ValueError(
|
||
f'来源「{source_table or "(空)"}」不支持退回，'
|
||
f'仅支持 stock_buy / stock_semi / stock_product'
|
||
)
|
||
|
||
row = model.query.with_for_update().get(stock_id) if stock_id else None
|
||
if not row:
|
||
raise ValueError(
|
||
f'原库存行已不存在（{source_table}#{stock_id}），无法自动退回，'
|
||
f'请改走入库流程手工登记这批实物'
|
||
)
|
||
return row
|
||
|
||
|
||
def _assert_company_owns(row):
|
||
"""
|
||
行级多租户隔离：非跨域用户只能操作本公司库存。不满足即抛 PermissionError。
|
||
|
||
口径与扫码出库（OutboundService.get_stock_by_barcode）、状态变更接口完全一致
|
||
—— 都走 MaterialBase.company_name，避免三处隔离逻辑分叉。
|
||
"""
|
||
company_limit = get_current_company_filter()
|
||
if company_limit is None:
|
||
return
|
||
base = getattr(row, 'base', None)
|
||
if (company_limit == '__NO_COMPANY__' or base is None
|
||
or (base.company_name or '') != company_limit):
|
||
raise PermissionError('无权操作其他公司的库存')
|
||
|
||
|
||
@bp.route('/defective', methods=['GET'])
|
||
@permission_required('inventory_stocktake')
|
||
def list_defective_goods():
|
||
"""
|
||
不良品在管台账分页查询（供「不良品在管台账」看板页使用）。
|
||
|
||
Query:
|
||
page 页码，默认 1
|
||
page_size 每页条数，默认 20
|
||
status 状态精确过滤（待处理/处理中/已回库/已报废/已闭环）；'全部' 或空 = 不过滤
|
||
keyword 模糊匹配 物料名称 / SKU / 规格型号
|
||
start_date / end_date 按退回时间（created_at）过滤
|
||
|
||
行级隔离：本表自带 company_name 快照，直接按它过滤。刻意不联表
|
||
MaterialBase —— 坏件的原库存行可能已被删除，联表会让记录整批消失。
|
||
"""
|
||
page = request.args.get('page', 1, type=int) or 1
|
||
page_size = request.args.get('page_size', 20, type=int) or 20
|
||
page_size = min(max(page_size, 1), 200) # 防超大分页拖垮库
|
||
|
||
status = (request.args.get('status') or '').strip()
|
||
keyword = (request.args.get('keyword') or '').strip()
|
||
start_date = (request.args.get('start_date') or '').strip()
|
||
end_date = (request.args.get('end_date') or '').strip()
|
||
|
||
try:
|
||
query = TransDefectiveGoods.query
|
||
|
||
# 行级隔离（超管/跨域 company_limit 为 None，不受限）
|
||
company_limit = get_current_company_filter()
|
||
if company_limit is not None:
|
||
query = query.filter(TransDefectiveGoods.company_name == company_limit)
|
||
|
||
if status and status not in ('全部', 'all'):
|
||
if status not in VALID_DEFECTIVE_STATUSES:
|
||
return jsonify({
|
||
'code': 400,
|
||
'msg': f'不支持的状态：{status}，'
|
||
f'仅支持 {"、".join(VALID_DEFECTIVE_STATUSES)}',
|
||
}), 400
|
||
query = query.filter(TransDefectiveGoods.status == status)
|
||
|
||
if keyword:
|
||
like = f'%{keyword}%'
|
||
query = query.filter(db.or_(
|
||
TransDefectiveGoods.material_name.ilike(like),
|
||
TransDefectiveGoods.sku.ilike(like),
|
||
TransDefectiveGoods.spec_model.ilike(like),
|
||
))
|
||
|
||
# 日期边界补全时分秒，避免 10 位日期被当成零点截断（与全系统口径一致）
|
||
if start_date and len(start_date) == 10:
|
||
start_date = f'{start_date} 00:00:00'
|
||
if end_date and len(end_date) == 10:
|
||
end_date = f'{end_date} 23:59:59'
|
||
if start_date:
|
||
query = query.filter(TransDefectiveGoods.created_at >= start_date)
|
||
if end_date:
|
||
query = query.filter(TransDefectiveGoods.created_at <= end_date)
|
||
|
||
# 默认按退回时间倒序：最新的坏件最需要处理
|
||
query = query.order_by(TransDefectiveGoods.created_at.desc(),
|
||
TransDefectiveGoods.id.desc())
|
||
|
||
pg = query.paginate(page=page, per_page=page_size, error_out=False)
|
||
|
||
# 汇总卡：在管总量（剩余待处理合计），供看板顶部展示
|
||
pending_total = db.session.query(
|
||
db.func.coalesce(db.func.sum(TransDefectiveGoods.remaining_qty), 0)
|
||
)
|
||
if company_limit is not None:
|
||
pending_total = pending_total.filter(
|
||
TransDefectiveGoods.company_name == company_limit)
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': 'success',
|
||
'data': {
|
||
'list': [g.to_dict() for g in pg.items],
|
||
'total': pg.total,
|
||
'page': page,
|
||
'page_size': page_size,
|
||
'pending_total': float(pending_total.scalar() or 0),
|
||
},
|
||
}), 200
|
||
|
||
except Exception as e:
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'查询失败: {str(e)}'}), 500
|
||
|
||
|
||
def _defective_unit_cost(goods):
|
||
"""
|
||
取坏件单价，用于报废台账的 cost_at_scrap / total_loss（best-effort）。
|
||
|
||
取价口径与既有报废模块一致：成品取 sale_price，采购件取 pre_tax_unit_price，
|
||
半成品无价（返回 0）。
|
||
|
||
★ 原库存行可能已被删除（入库模块会物理删除库存行），故取不到时返回 0 ——
|
||
与借库转报废（TransService.scrap_borrow 里 cost_at_scrap=0/total_loss=0）
|
||
口径一致。刻意**不**因缺行而中断报废：实物已经销毁，台账必须先记上，
|
||
成本缺失是可接受的降级，记录丢失不是。
|
||
"""
|
||
model = get_stock_model(goods.source_table)
|
||
if model is None or not goods.stock_id:
|
||
return 0.0
|
||
row = model.query.get(goods.stock_id)
|
||
if not row:
|
||
return 0.0
|
||
if goods.source_table == 'stock_product':
|
||
return float(getattr(row, 'sale_price', 0) or 0)
|
||
if goods.source_table == 'stock_buy':
|
||
return float(getattr(row, 'pre_tax_unit_price', 0) or 0)
|
||
return 0.0
|
||
|
||
|
||
@bp.route('/return-from-outbound', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
# ★ 幂等锁置于 permission_required 内层（理由见 restock_defective_goods）
|
||
@prevent_double_submit(lock_timeout=5)
|
||
def return_from_outbound():
|
||
"""
|
||
通用原单退回。
|
||
|
||
Body(JSON):
|
||
{
|
||
"outbound_id": 123, # 必填，trans_outbound.id（出库**明细行**，非单号）
|
||
"return_qty": 2, # 必填，本次退回数量
|
||
"is_defective": false, # 必填，true=不良品退回，false=良品退回
|
||
"reason": "错领退回" # 可选
|
||
}
|
||
|
||
两条分支的差异：
|
||
· 良品 → 加回原库存行的 stock_quantity 与 available_quantity
|
||
· 不良品 → 库存表分毫不动，转 trans_defective_goods 在管台账
|
||
"""
|
||
data = request.get_json(silent=True) or {}
|
||
operator_name = _normalize_user_id()
|
||
|
||
outbound_id = data.get('outbound_id')
|
||
is_defective = data.get('is_defective')
|
||
reason = (data.get('reason') or '').strip() or None
|
||
|
||
# ---- 1. 入参校验（脏值一律挡在入口）----
|
||
if not outbound_id:
|
||
return jsonify({'code': 400, 'msg': 'outbound_id 为必填'}), 400
|
||
if is_defective is None:
|
||
return jsonify({
|
||
'code': 400,
|
||
'msg': 'is_defective 为必填（true=不良品退回，false=良品退回）',
|
||
}), 400
|
||
is_defective = bool(is_defective)
|
||
|
||
try:
|
||
return_qty = float(data.get('return_qty') or 0)
|
||
except (TypeError, ValueError):
|
||
return jsonify({'code': 400, 'msg': 'return_qty 无效'}), 400
|
||
if return_qty <= 0:
|
||
return jsonify({'code': 400, 'msg': '退回数量必须大于 0'}), 400
|
||
|
||
try:
|
||
# ---- 2. 锁定原出库明细并校验退回额度 ----
|
||
# ★ 行锁不可省：并发两笔退回若各自读到相同的 returned_quantity，会双双
|
||
# 通过额度校验，合计退回量超过出库量 —— 凭空多出库存。
|
||
outbound = TransOutbound.query.with_for_update().get(outbound_id)
|
||
if not outbound:
|
||
raise ValueError(f'出库记录不存在（ID: {outbound_id}）')
|
||
|
||
shipped = float(outbound.quantity or 0)
|
||
returned = float(outbound.returned_quantity or 0)
|
||
returnable = shipped - returned
|
||
if return_qty > returnable:
|
||
raise ValueError(
|
||
f'退回数量({return_qty})超出可退额度({returnable})：'
|
||
f'原出库 {shipped}，已退回 {returned}'
|
||
)
|
||
|
||
# ---- 3. 锁定原库存行 + 多租户隔离 ----
|
||
stock_row = _lock_source_stock_row(outbound.source_table, outbound.stock_id)
|
||
_assert_company_owns(stock_row)
|
||
|
||
goods = None
|
||
if is_defective:
|
||
# ================= 不良品分支 =================
|
||
# ★ 原库存表**分毫不动**：坏件全程存放于独立在管台账，既不占用库存
|
||
# 数量、也不改库存行 status，从根上杜绝「坏件混进可分配池」。
|
||
base = getattr(stock_row, 'base', None)
|
||
goods = TransDefectiveGoods(
|
||
outbound_id=outbound.id,
|
||
source_table=outbound.source_table,
|
||
stock_id=outbound.stock_id,
|
||
base_id=getattr(stock_row, 'base_id', None),
|
||
sku=getattr(stock_row, 'sku', '') or '',
|
||
material_name=(base.name if base else '') or '',
|
||
spec_model=(base.spec_model if base else '') or '',
|
||
quantity=return_qty,
|
||
remaining_qty=return_qty,
|
||
status=DEFECTIVE_STATUS_PENDING,
|
||
company_name=(base.company_name if base else '') or '',
|
||
reason=reason,
|
||
operator=operator_name,
|
||
)
|
||
db.session.add(goods)
|
||
outcome = '不良品已转入在管台账'
|
||
else:
|
||
# ================= 良品分支 =================
|
||
# ★ 状态防呆：把良品加回一个已冻结/不良品的行，会让良品被该行的状态
|
||
# 连带隔离（status 是行级属性）—— 静默造成良品不可用。宁可报错让
|
||
# 人先决定该行的归属。
|
||
current = (stock_row.status or '').strip()
|
||
if current != STOCK_STATUS_IN_STOCK:
|
||
raise ValueError(
|
||
f'原库存行当前状态为「{current or "未设置"}」，'
|
||
f'良品退回要求该行处于「{STOCK_STATUS_IN_STOCK}」状态'
|
||
)
|
||
stock_row.stock_quantity = float(stock_row.stock_quantity or 0) + return_qty
|
||
stock_row.available_quantity = float(stock_row.available_quantity or 0) + return_qty
|
||
outcome = '良品已加回原库存'
|
||
|
||
# ---- 4. 累加退回额度 + 写退回流水 ----
|
||
outbound.returned_quantity = returned + return_qty
|
||
|
||
ledger = TransReturn(
|
||
outbound_id=outbound.id,
|
||
stock_id=outbound.stock_id,
|
||
source_table=outbound.source_table,
|
||
sku=outbound.sku,
|
||
return_qty=return_qty,
|
||
return_type=RETURN_TYPE_DEFECTIVE if is_defective else RETURN_TYPE_GOOD,
|
||
reason=reason,
|
||
operator=operator_name,
|
||
)
|
||
db.session.add(ledger)
|
||
db.session.flush() # 先拿到 ledger.id，供在管台账回填
|
||
|
||
# 在管台账回填来源流水 id，形成「出库 → 退回流水 → 在管台账」的追溯闭环
|
||
if goods is not None:
|
||
goods.return_id = ledger.id
|
||
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': f'退回成功，{outcome}',
|
||
'data': {
|
||
'outbound_id': outbound.id,
|
||
'return_id': ledger.id,
|
||
'return_type': ledger.return_type,
|
||
'return_qty': return_qty,
|
||
'returned_quantity': float(outbound.returned_quantity),
|
||
'returnable_quantity': shipped - float(outbound.returned_quantity),
|
||
'defective_goods_id': goods.id if goods is not None else None,
|
||
},
|
||
}), 200
|
||
|
||
except PermissionError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 403, 'msg': str(e)}), 403
|
||
except ValueError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 400, 'msg': str(e)}), 400
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'退回失败: {str(e)}'}), 500
|
||
|
||
|
||
@bp.route('/defective/<int:goods_id>/restock', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
# ★ 幂等锁必须置于 permission_required **内层**：prevent_double_submit 依赖
|
||
# get_jwt_identity()，若放在外层则 JWT 尚未验证 → 抛错 → 被其 except 捕获
|
||
# 后 fail-open 降级放行，锁形同虚设。
|
||
@prevent_double_submit(lock_timeout=5)
|
||
def restock_defective_goods(goods_id):
|
||
"""
|
||
不良品修好后一键回库。
|
||
|
||
Body(JSON):
|
||
{
|
||
"restock_qty": 2, # 可选，缺省 = 全部剩余在管量
|
||
"remark": "已更换主板" # 可选
|
||
}
|
||
|
||
★ 与 trans_repair（维修模块）完全解耦：本接口操作的是 trans_defective_goods
|
||
在管台账。trans_repair 是 SN 单台粒度且无任何数量列，承载不了「一批坏件」。
|
||
"""
|
||
data = request.get_json(silent=True) or {}
|
||
operator_name = _normalize_user_id()
|
||
|
||
try:
|
||
# ---- 1. 锁定在管记录 ----
|
||
# ★ 行锁不可省：并发两次回库若各自读到相同的 remaining_qty，会双双通过
|
||
# 校验，合计回库量超过在管量 —— 凭空多出库存。
|
||
goods = TransDefectiveGoods.query.with_for_update().get(goods_id)
|
||
if not goods:
|
||
raise ValueError(f'不良品在管记录不存在（ID: {goods_id}）')
|
||
|
||
# ---- 2. 状态守门（Fail-Closed）----
|
||
# 已回库 → 再回库就是凭空多一份库存；已报废 → 实物已销毁。
|
||
if goods.status not in RESTOCKABLE_DEFECTIVE_STATUSES:
|
||
raise ValueError(
|
||
f'当前状态为「{goods.status}」，不可回库'
|
||
f'（仅 {"、".join(RESTOCKABLE_DEFECTIVE_STATUSES)} 可回库）'
|
||
)
|
||
|
||
remaining = float(goods.remaining_qty or 0)
|
||
if remaining <= 0:
|
||
raise ValueError('该记录在管数量为 0，无可回库数量')
|
||
|
||
raw = data.get('restock_qty')
|
||
if raw is None or raw == '':
|
||
restock_qty = remaining # 缺省：整批剩余一次回库
|
||
else:
|
||
try:
|
||
restock_qty = float(raw)
|
||
except (TypeError, ValueError):
|
||
raise ValueError('restock_qty 无效')
|
||
|
||
if restock_qty <= 0:
|
||
raise ValueError('回库数量必须大于 0')
|
||
if restock_qty > remaining:
|
||
raise ValueError(f'回库数量({restock_qty})超过在管数量({remaining})')
|
||
|
||
# ---- 3. 回到原库存行 ----
|
||
stock_row = _lock_source_stock_row(goods.source_table, goods.stock_id)
|
||
_assert_company_owns(stock_row)
|
||
|
||
current = (stock_row.status or '').strip()
|
||
if current != STOCK_STATUS_IN_STOCK:
|
||
raise ValueError(
|
||
f'原库存行当前状态为「{current or "未设置"}」，'
|
||
f'请先将其恢复为「{STOCK_STATUS_IN_STOCK}」再回库'
|
||
)
|
||
|
||
stock_row.stock_quantity = float(stock_row.stock_quantity or 0) + restock_qty
|
||
stock_row.available_quantity = float(stock_row.available_quantity or 0) + restock_qty
|
||
|
||
# ---- 4. 递减在管量、累加回库量并推进状态机 ----
|
||
new_remaining = remaining - restock_qty
|
||
goods.remaining_qty = new_remaining
|
||
goods.restocked_qty = float(goods.restocked_qty or 0) + restock_qty
|
||
# ★ 终态由「累计去向」推导而非「最后一次动作」：本批可能既回库过、
|
||
# 又报废过，按最后一次动作定状态会产生误导（见 defective_close_status）
|
||
goods.status = (
|
||
defective_close_status(goods.restocked_qty, goods.scrapped_qty)
|
||
if new_remaining <= 0 else DEFECTIVE_STATUS_IN_PROGRESS
|
||
)
|
||
|
||
# ★ 刻意**不覆盖** goods.operator：该字段记录的是「谁退回来的」，
|
||
# 覆盖会丢掉退回环节的责任人。本次回库人由 audit_listener 自动
|
||
# 写入 audit_logs（trans_defective_goods 已在审计白名单内）。
|
||
if data.get('remark'):
|
||
goods.remark = str(data['remark']).strip()
|
||
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': '回库成功',
|
||
'data': {
|
||
'id': goods.id,
|
||
'restock_qty': restock_qty,
|
||
'remaining_qty': float(goods.remaining_qty),
|
||
'status': goods.status,
|
||
'source_table': goods.source_table,
|
||
'stock_id': goods.stock_id,
|
||
},
|
||
}), 200
|
||
|
||
except PermissionError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 403, 'msg': str(e)}), 403
|
||
except ValueError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 400, 'msg': str(e)}), 400
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'回库失败: {str(e)}'}), 500
|
||
|
||
|
||
@bp.route('/defective/<int:goods_id>/scrap', methods=['POST'])
|
||
@permission_required('inventory_stocktake:operation')
|
||
# ★ 幂等锁置于 permission_required 内层（理由见 restock_defective_goods）
|
||
@prevent_double_submit(lock_timeout=5)
|
||
def scrap_defective_goods(goods_id):
|
||
"""
|
||
在管坏件报废（鉴定后确认无法维修，直接销毁）。
|
||
|
||
Body(JSON):
|
||
{
|
||
"scrap_qty": 2, # 可选，缺省 = 全部剩余在管量
|
||
"reason": "主板烧毁无法修复" # 必填
|
||
}
|
||
|
||
★ 与库存表的关系：坏件从未进入库存表（二期设计），因此本接口**不动任何
|
||
库存行**——它只做两件事：
|
||
1. 递减在管台账的 remaining_qty、累加 scrapped_qty、推进状态机；
|
||
2. 往 trans_scrap 写一条报废台账，保证报废报表口径完整。
|
||
这与「库存行报废」（扣 stock_quantity / available_quantity）是两条
|
||
互不重叠的路径，不会重复扣减。
|
||
"""
|
||
data = request.get_json(silent=True) or {}
|
||
operator_name = _normalize_user_id()
|
||
|
||
reason = (data.get('reason') or '').strip()
|
||
if not reason:
|
||
return jsonify({'code': 400, 'msg': '报废原因必填'}), 400
|
||
|
||
try:
|
||
# ---- 1. 锁定在管记录（并发下防超报废）----
|
||
goods = TransDefectiveGoods.query.with_for_update().get(goods_id)
|
||
if not goods:
|
||
raise ValueError(f'不良品在管记录不存在（ID: {goods_id}）')
|
||
|
||
# ---- 2. 状态守门（Fail-Closed）----
|
||
if goods.status not in SCRAPPABLE_DEFECTIVE_STATUSES:
|
||
raise ValueError(
|
||
f'当前状态为「{goods.status}」，不可报废'
|
||
f'（仅 {"、".join(SCRAPPABLE_DEFECTIVE_STATUSES)} 可报废）'
|
||
)
|
||
|
||
remaining = float(goods.remaining_qty or 0)
|
||
if remaining <= 0:
|
||
raise ValueError('该记录在管数量为 0，无可报废数量')
|
||
|
||
raw = data.get('scrap_qty')
|
||
if raw is None or raw == '':
|
||
scrap_qty = remaining # 缺省：整批剩余一次报废
|
||
else:
|
||
try:
|
||
scrap_qty = float(raw)
|
||
except (TypeError, ValueError):
|
||
raise ValueError('scrap_qty 无效')
|
||
|
||
if scrap_qty <= 0:
|
||
raise ValueError('报废数量必须大于 0')
|
||
if scrap_qty > remaining:
|
||
raise ValueError(f'报废数量({scrap_qty})超过在管数量({remaining})')
|
||
|
||
# ---- 3. 多租户隔离 ----
|
||
# 直接比对台账自身的 company_name 快照 —— 坏件的原库存行可能已被删除，
|
||
# 不能依赖联表取公司（那会让这类记录绕过隔离）。
|
||
company_limit = get_current_company_filter()
|
||
if company_limit is not None:
|
||
if (company_limit == '__NO_COMPANY__'
|
||
or (goods.company_name or '') != company_limit):
|
||
raise PermissionError('无权操作其他公司的不良品')
|
||
|
||
# ---- 4. 递减在管量、累加报废量、推进状态机 ----
|
||
new_remaining = remaining - scrap_qty
|
||
goods.remaining_qty = new_remaining
|
||
goods.scrapped_qty = float(goods.scrapped_qty or 0) + scrap_qty
|
||
goods.status = (
|
||
defective_close_status(goods.restocked_qty, goods.scrapped_qty)
|
||
if new_remaining <= 0 else DEFECTIVE_STATUS_IN_PROGRESS
|
||
)
|
||
|
||
# ---- 5. 写报废台账 ----
|
||
# ★ source_table 用 'trans_defective_goods'、stock_id 存台账自身主键，
|
||
# 与既有约定一致（trans_borrow / trans_repair 作为来源时同样存各自主键）。
|
||
# 刻意**不**写原始库存表名 —— 那批坏件从未计入原库存行，若冒充库存
|
||
# 来源会让报废台账与库存表对不上账。
|
||
unit_price = _defective_unit_cost(goods)
|
||
db.session.add(TransScrap(
|
||
sku=goods.sku or '',
|
||
source_table='trans_defective_goods',
|
||
stock_id=goods.id,
|
||
quantity=scrap_qty,
|
||
reason=f"[不良品在管报废] {reason}",
|
||
operator_name=operator_name,
|
||
approval_status='approved', # 在管坏件鉴定后直接销毁，不走审批流
|
||
cost_at_scrap=unit_price,
|
||
total_loss=round(unit_price * scrap_qty, 2),
|
||
))
|
||
|
||
db.session.commit()
|
||
|
||
return jsonify({
|
||
'code': 200,
|
||
'msg': '报废成功',
|
||
'data': {
|
||
'id': goods.id,
|
||
'scrap_qty': scrap_qty,
|
||
'remaining_qty': float(goods.remaining_qty),
|
||
'restocked_qty': float(goods.restocked_qty),
|
||
'scrapped_qty': float(goods.scrapped_qty),
|
||
'status': goods.status,
|
||
},
|
||
}), 200
|
||
|
||
except PermissionError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 403, 'msg': str(e)}), 403
|
||
except ValueError as e:
|
||
db.session.rollback()
|
||
return jsonify({'code': 400, 'msg': str(e)}), 400
|
||
except Exception as e:
|
||
db.session.rollback()
|
||
traceback.print_exc()
|
||
return jsonify({'code': 500, 'msg': f'报废失败: {str(e)}'}), 500
|