添加反射率定标

.pio/libdeps/esp32-s3-devkitc-1/SparkFun u-blox Arduino Library/examples/Example15_GetDateTime/Example15_GetDateTime.ino

@@ -0,0 +1,107 @@
+/*
+  Getting time and date using Ublox commands
+  By: davidallenmann
+  SparkFun Electronics
+  Date: April 16th, 2019
+  License: MIT. See license file for more information but you can
+  basically do whatever you want with this code.
+
+  This example shows how to query a Ublox module for the current time and date. We also
+  turn off the NMEA output on the I2C port. This decreases the amount of I2C traffic
+  dramatically.
+
+  Leave NMEA parsing behind. Now you can simply ask the module for the datums you want!
+
+  Feel like supporting open source hardware?
+  Buy a board from SparkFun!
+  ZED-F9P RTK2: https://www.sparkfun.com/products/15136
+  NEO-M8P RTK: https://www.sparkfun.com/products/15005
+  SAM-M8Q: https://www.sparkfun.com/products/15106
+
+  Hardware Connections:
+  Plug a Qwiic cable into the GPS and a BlackBoard
+  If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
+  Open the serial monitor at 115200 baud to see the output
+*/
+
+#include <Wire.h> //Needed for I2C to GPS
+
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
+SFE_UBLOX_GPS myGPS;
+
+long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.
+
+void setup()
+{
+  Serial.begin(115200);
+  while (!Serial)
+    ; //Wait for user to open terminal
+  Serial.println("SparkFun Ublox Example");
+
+  Wire.begin();
+
+  if (myGPS.begin() == false) //Connect to the Ublox module using Wire port
+  {
+    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    while (1)
+      ;
+  }
+
+  myGPS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise)
+  myGPS.saveConfiguration();        //Save the current settings to flash and BBR
+}
+
+void loop()
+{
+  //Query module only every second. Doing it more often will just cause I2C traffic.
+  //The module only responds when a new position is available
+  if (millis() - lastTime > 1000)
+  {
+    lastTime = millis(); //Update the timer
+
+    long latitude = myGPS.getLatitude();
+    Serial.print(F("Lat: "));
+    Serial.print(latitude);
+
+    long longitude = myGPS.getLongitude();
+    Serial.print(F(" Long: "));
+    Serial.print(longitude);
+    Serial.print(F(" (degrees * 10^-7)"));
+
+    long altitude = myGPS.getAltitude();
+    Serial.print(F(" Alt: "));
+    Serial.print(altitude);
+    Serial.print(F(" (mm)"));
+
+    byte SIV = myGPS.getSIV();
+    Serial.print(F(" SIV: "));
+    Serial.print(SIV);
+
+    Serial.println();
+    Serial.print(myGPS.getYear());
+    Serial.print("-");
+    Serial.print(myGPS.getMonth());
+    Serial.print("-");
+    Serial.print(myGPS.getDay());
+    Serial.print(" ");
+    Serial.print(myGPS.getHour());
+    Serial.print(":");
+    Serial.print(myGPS.getMinute());
+    Serial.print(":");
+    Serial.print(myGPS.getSecond());
+
+    Serial.print("  Time is ");
+    if (myGPS.getTimeValid() == false)
+    {
+      Serial.print("not ");
+    }
+    Serial.print("valid  Date is ");
+    if (myGPS.getDateValid() == false)
+    {
+      Serial.print("not ");
+    }
+    Serial.print("valid");
+
+    Serial.println();
+  }
+}