142 lines
4.5 KiB
C++
142 lines
4.5 KiB
C++
/*
|
|
Configuring the GPS to automatically send position reports over I2C
|
|
By: Nathan Seidle and Thorsten von Eicken
|
|
SparkFun Electronics
|
|
Date: January 3rd, 2019
|
|
License: MIT. See license file for more information but you can
|
|
basically do whatever you want with this code.
|
|
|
|
This example shows how to configure the U-Blox GPS the send navigation reports automatically
|
|
and retrieving the latest one via getPVT. This eliminates the blocking in getPVT while the GPS
|
|
produces a fresh navigation solution at the expense of returning a slighly old solution.
|
|
|
|
This can be used over serial or over I2C, this example shows the I2C use. With serial the GPS
|
|
simply outputs the UBX_NAV_PVT packet. With I2C it queues it into its internal I2C buffer (4KB in
|
|
size?) where it can be retrieved in the next I2C poll.
|
|
|
|
Feel like supporting open source hardware?
|
|
Buy a board from SparkFun!
|
|
ZED-F9P RTK2: https://www.sparkfun.com/products/15136
|
|
NEO-M8P RTK: https://www.sparkfun.com/products/15005
|
|
SAM-M8Q: https://www.sparkfun.com/products/15106
|
|
|
|
Hardware Connections:
|
|
Plug a Qwiic cable into the GPS and a BlackBoard
|
|
If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
|
|
Open the serial monitor at 115200 baud to see the output
|
|
*/
|
|
|
|
#include <Wire.h> //Needed for I2C to GPS
|
|
|
|
#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
|
|
SFE_UBLOX_GPS myGPS;
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
while (!Serial); //Wait for user to open terminal
|
|
Serial.println("SparkFun Ublox Example");
|
|
|
|
Wire.begin();
|
|
|
|
if (myGPS.begin() == false) //Connect to the Ublox module using Wire port
|
|
{
|
|
Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
|
|
while (1);
|
|
}
|
|
|
|
myGPS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise)
|
|
myGPS.setNavigationFrequency(2); //Produce two solutions per second
|
|
myGPS.setAutoPVT(true); //Tell the GPS to "send" each solution
|
|
myGPS.saveConfiguration(); //Save the current settings to flash and BBR
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// Calling getPVT returns true if there actually is a fresh navigation solution available.
|
|
// Start the reading only when valid LLH is available
|
|
if (myGPS.getPVT() && (myGPS.getInvalidLlh() == false))
|
|
{
|
|
Serial.println();
|
|
long latitude = myGPS.getLatitude();
|
|
Serial.print(F("Lat: "));
|
|
Serial.print(latitude);
|
|
|
|
long longitude = myGPS.getLongitude();
|
|
Serial.print(F(" Long: "));
|
|
Serial.print(longitude);
|
|
Serial.print(F(" (degrees * 10^-7)"));
|
|
|
|
long altitude = myGPS.getAltitude();
|
|
Serial.print(F(" Alt: "));
|
|
Serial.print(altitude);
|
|
Serial.print(F(" (mm)"));
|
|
|
|
byte SIV = myGPS.getSIV();
|
|
Serial.print(F(" SIV: "));
|
|
Serial.print(SIV);
|
|
|
|
int PDOP = myGPS.getPDOP();
|
|
Serial.print(F(" PDOP: "));
|
|
Serial.print(PDOP);
|
|
Serial.print(F(" (10^-2)"));
|
|
|
|
int nedNorthVel = myGPS.getNedNorthVel();
|
|
Serial.print(F(" VelN: "));
|
|
Serial.print(nedNorthVel);
|
|
Serial.print(F(" (mm/s)"));
|
|
|
|
int nedEastVel = myGPS.getNedEastVel();
|
|
Serial.print(F(" VelE: "));
|
|
Serial.print(nedEastVel);
|
|
Serial.print(F(" (mm/s)"));
|
|
|
|
int nedDownVel = myGPS.getNedDownVel();
|
|
Serial.print(F(" VelD: "));
|
|
Serial.print(nedDownVel);
|
|
Serial.print(F(" (mm/s)"));
|
|
|
|
int verticalAccEst = myGPS.getVerticalAccEst();
|
|
Serial.print(F(" VAccEst: "));
|
|
Serial.print(verticalAccEst);
|
|
Serial.print(F(" (mm)"));
|
|
|
|
int horizontalAccEst = myGPS.getHorizontalAccEst();
|
|
Serial.print(F(" HAccEst: "));
|
|
Serial.print(horizontalAccEst);
|
|
Serial.print(F(" (mm)"));
|
|
|
|
int speedAccEst = myGPS.getSpeedAccEst();
|
|
Serial.print(F(" SpeedAccEst: "));
|
|
Serial.print(speedAccEst);
|
|
Serial.print(F(" (mm/s)"));
|
|
|
|
int headAccEst = myGPS.getHeadingAccEst();
|
|
Serial.print(F(" HeadAccEst: "));
|
|
Serial.print(headAccEst);
|
|
Serial.print(F(" (degrees * 10^-5)"));
|
|
|
|
if (myGPS.getHeadVehValid() == true) {
|
|
int headVeh = myGPS.getHeadVeh();
|
|
Serial.print(F(" HeadVeh: "));
|
|
Serial.print(headVeh);
|
|
Serial.print(F(" (degrees * 10^-5)"));
|
|
|
|
int magDec = myGPS.getMagDec();
|
|
Serial.print(F(" MagDec: "));
|
|
Serial.print(magDec);
|
|
Serial.print(F(" (degrees * 10^-2)"));
|
|
|
|
int magAcc = myGPS.getMagAcc();
|
|
Serial.print(F(" MagAcc: "));
|
|
Serial.print(magAcc);
|
|
Serial.print(F(" (degrees * 10^-2)"));
|
|
}
|
|
|
|
Serial.println();
|
|
} else {
|
|
Serial.print(".");
|
|
delay(50);
|
|
}
|
|
}
|