v2.9

lib/Adafruit BusIO/examples/i2c_registers/i2c_registers.ino

@@ -0,0 +1,38 @@
+#include <Adafruit_I2CDevice.h>
+#include <Adafruit_BusIO_Register.h>
+
+#define I2C_ADDRESS 0x60
+Adafruit_I2CDevice i2c_dev = Adafruit_I2CDevice(I2C_ADDRESS);
+
+
+void setup() {
+  while (!Serial) { delay(10); }
+  Serial.begin(115200);
+  Serial.println("I2C device register test");
+
+  if (!i2c_dev.begin()) {
+    Serial.print("Did not find device at 0x");
+    Serial.println(i2c_dev.address(), HEX);
+    while (1);
+  }
+  Serial.print("Device found on address 0x");
+  Serial.println(i2c_dev.address(), HEX);
+
+  Adafruit_BusIO_Register id_reg = Adafruit_BusIO_Register(&i2c_dev, 0x0C, 2, LSBFIRST);
+  uint16_t id;
+  id_reg.read(&id);
+  Serial.print("ID register = 0x"); Serial.println(id, HEX);
+
+  Adafruit_BusIO_Register thresh_reg = Adafruit_BusIO_Register(&i2c_dev, 0x01, 2, LSBFIRST);
+  uint16_t thresh;
+  thresh_reg.read(&thresh);
+  Serial.print("Initial threshold register = 0x"); Serial.println(thresh, HEX);
+
+  thresh_reg.write(~thresh);
+
+  Serial.print("Post threshold register = 0x"); Serial.println(thresh_reg.read(), HEX);
+}
+
+void loop() {
+  
+}