v2.9

lib/DallasTemperature/examples/UserDataDemo/UserDataDemo.ino

@@ -0,0 +1,115 @@
+//
+// FILE: UserDataDemo.ino
+// AUTHOR: Rob Tillaart
+// VERSION: 0.1.0
+// PURPOSE: use of alarm field as user identification demo
+// DATE: 2019-12-23
+// URL:
+//
+// Released to the public domain
+//
+
+#include <OneWire.h>
+#include <DallasTemperature.h>
+
+#define ONE_WIRE_BUS      2
+
+OneWire oneWire(ONE_WIRE_BUS);
+DallasTemperature sensors(&oneWire);
+
+uint8_t deviceCount = 0;
+
+// Add 4 prepared sensors to the bus
+// use the UserDataWriteBatch demo to prepare 4 different labeled sensors
+struct
+{
+  int id;
+  DeviceAddress addr;
+} T[4];
+
+float getTempByID(int id)
+{
+  for (uint8_t index = 0; index < deviceCount; index++)
+  {
+    if (T[index].id == id)
+    {
+      return sensors.getTempC(T[index].addr);
+    }
+  }
+  return -999;
+}
+
+void printAddress(DeviceAddress deviceAddress)
+{
+  for (uint8_t i = 0; i < 8; i++)
+  {
+    // zero pad the address if necessary
+    if (deviceAddress[i] < 16) Serial.print("0");
+    Serial.print(deviceAddress[i], HEX);
+  }
+}
+
+void setup(void)
+{
+  Serial.begin(115200);
+  Serial.println(__FILE__);
+  Serial.println("Dallas Temperature Demo");
+
+  sensors.begin();
+
+  // count devices
+  deviceCount = sensors.getDeviceCount();
+  Serial.print("#devices: ");
+  Serial.println(deviceCount);
+
+  // Read ID's per sensor
+  // and put them in T array
+  for (uint8_t index = 0; index < deviceCount; index++)
+  {
+    // go through sensors
+    sensors.getAddress(T[index].addr, index);
+    T[index].id = sensors.getUserData(T[index].addr);
+  }
+
+  // Check all 4 sensors are set
+  for (uint8_t index = 0; index < deviceCount; index++)
+  {
+    Serial.println();
+    Serial.println(T[index].id);
+    printAddress(T[index].addr);
+    Serial.println();
+  }
+  Serial.println();
+
+}
+
+
+void loop(void)
+{
+  Serial.println();
+  Serial.print(millis());
+  Serial.println("\treq temp");
+  sensors.requestTemperatures();
+
+  Serial.print(millis());
+  Serial.println("\tGet temp by address");
+  for (int i = 0; i < 4; i++)
+  {
+    Serial.print(millis());
+    Serial.print("\t temp:\t");
+    Serial.println(sensors.getTempC(T[i].addr));
+  }
+
+  Serial.print(millis());
+  Serial.println("\tGet temp by ID");  // assume ID = 0, 1, 2, 3
+  for (int id = 0; id < 4; id++)
+  {
+    Serial.print(millis());
+    Serial.print("\t temp:\t");
+    Serial.println(getTempByID(id));
+  }
+
+  delay(1000);
+}
+
+// END OF FILE