v2.9

lib/SparkFun u-blox Arduino Library/examples/ZED-F9P/Example6_GetVal/Example6_GetVal.ino

@@ -0,0 +1,88 @@
+/*
+  Get a device's I2C address using advanced getVal method
+  By: Nathan Seidle
+  SparkFun Electronics
+  Date: January 9th, 2019
+  License: MIT. See license file for more information but you can
+  basically do whatever you want with this code.
+
+  u-blox changed how to configure their modules in 2019. As of version 23 of the UBX protocol the
+  UBX-CFG commands are deprecated; they still work, they just recommend using VALSET, VALGET, and VALDEL
+  commands instead. This example shows how to use this new command structure.
+
+  Feel like supporting open source hardware?
+  Buy a board from SparkFun!
+  ZED-F9P RTK2: https://www.sparkfun.com/products/15136
+  NEO-M8P RTK: https://www.sparkfun.com/products/15005
+  SAM-M8Q: https://www.sparkfun.com/products/15106
+
+  Hardware Connections:
+  Plug a Qwiic cable into the GPS and a RedBoard Qwiic or BlackBoard
+  If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
+  Open the serial monitor at 115200 baud to see the output
+*/
+
+#include <Wire.h> //Needed for I2C to GPS
+
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
+SFE_UBLOX_GPS myGPS;
+
+long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.
+
+void setup()
+{
+  Serial.begin(115200);
+  while (!Serial)
+    ; //Wait for user to open terminal
+  Serial.println("u-blox getVal example");
+
+  Wire.begin();
+  Wire.setClock(400000); //Increase I2C clock speed to 400kHz
+
+  if (myGPS.begin() == false) //Connect to the Ublox module using Wire port
+  {
+    Serial.println(F("u-blox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    while (1)
+      ;
+  }
+
+  myGPS.enableDebugging(); //Enable debug messages over Serial (default)
+  //myGPS.enableDebugging(SerialUSB); //Enable debug messages over Serial USB
+
+  uint8_t currentI2Caddress = myGPS.getVal8(UBLOX_CFG_I2C_ADDRESS);
+  Serial.print("Current I2C address (should be 0x42): 0x");
+  Serial.println(currentI2Caddress >> 1, HEX); //Ublox module returns a shifted 8-bit address. Make it 7-bit unshifted.
+
+  while (1)
+    ;
+}
+
+void loop()
+{
+  //Query module only every second. Doing it more often will just cause I2C traffic.
+  //The module only responds when a new position is available
+  if (millis() - lastTime > 1000)
+  {
+    lastTime = millis(); //Update the timer
+
+    long latitude = myGPS.getLatitude();
+    Serial.print(F("Lat: "));
+    Serial.print(latitude);
+
+    long longitude = myGPS.getLongitude();
+    Serial.print(F(" Long: "));
+    Serial.print(longitude);
+    Serial.print(F(" (degrees * 10^-7)"));
+
+    long altitude = myGPS.getAltitude();
+    Serial.print(F(" Alt: "));
+    Serial.print(altitude);
+    Serial.print(F(" (mm)"));
+
+    byte SIV = myGPS.getSIV();
+    Serial.print(F(" SIV: "));
+    Serial.print(SIV);
+
+    Serial.println();
+  }
+}