83 lines
2.5 KiB
C++
83 lines
2.5 KiB
C++
/*
|
|
By: Elias Santistevan
|
|
SparkFun Electronics
|
|
Date: May, 2020
|
|
License: MIT. See license file for more information but you can
|
|
basically do whatever you want with this code.
|
|
|
|
Feel like supporting open source hardware?
|
|
Buy a board from SparkFun!
|
|
NEO-M8U: https://www.sparkfun.com/products/16329
|
|
ZED-F9R: https://www.sparkfun.com/products/16344
|
|
|
|
Hardware Connections:
|
|
Plug a Qwiic cable into the GPS and a Redboard Qwiic
|
|
If you don't have a platform with a Qwiic connection use the
|
|
SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
|
|
Open the serial monitor at 115200 baud to see the output
|
|
|
|
After calibrating the module and securing it to your vehicle such that it's
|
|
stable within 2 degrees, and the board is oriented correctly with regards to
|
|
the vehicle's frame, you can now read the vehicle's "attitude". The attitude
|
|
includes the vehicle's heading, pitch, and roll. You can also check the
|
|
accuracy of those readings.
|
|
|
|
*/
|
|
|
|
#include <Wire.h> //Needed for I2C to GPS
|
|
|
|
#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
|
|
SFE_UBLOX_GPS myGPS;
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
while (!Serial); //Wait for user to open terminal
|
|
Serial.println(F("SparkFun Ublox Example"));
|
|
|
|
Wire.begin();
|
|
|
|
if (myGPS.begin() == false) //Connect to the Ublox module using Wire port
|
|
{
|
|
Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
|
|
while (1);
|
|
}
|
|
|
|
myGPS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise)
|
|
|
|
if (myGPS.getEsfInfo()){
|
|
|
|
Serial.print(F("Fusion Mode: "));
|
|
Serial.println(myGPS.imuMeas.fusionMode);
|
|
|
|
if (myGPS.imuMeas.fusionMode == 1){
|
|
Serial.println(F("Fusion Mode is Initialized!"));
|
|
}
|
|
else {
|
|
Serial.println(F("Fusion Mode is either disabled or not initialized - Freezing!"));
|
|
Serial.println(F("Please see Example 1 description at top for more information."));
|
|
}
|
|
}
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
myGPS.getVehAtt(); // Give the sensor you want to check on.
|
|
Serial.print(F("Roll: "));
|
|
Serial.println(myGPS.vehAtt.roll);
|
|
Serial.print(F("Pitch: "));
|
|
Serial.println(myGPS.vehAtt.pitch);
|
|
Serial.print(F("Heading: "));
|
|
Serial.println(myGPS.vehAtt.heading);
|
|
Serial.print(F("Roll Accuracy: "));
|
|
Serial.println(myGPS.vehAtt.accRoll);
|
|
Serial.print(F("Pitch Accuracy: "));
|
|
Serial.println(myGPS.vehAtt.accPitch);
|
|
Serial.print(F("Heading Accuracy: "));
|
|
Serial.println(myGPS.vehAtt.accHeading);
|
|
|
|
delay(250);
|
|
}
|
|
|
|
|