38 lines
1.3 KiB
Plaintext
38 lines
1.3 KiB
Plaintext
Payload SDK Linux Sample.
|
|
|
|
Test Environment:
|
|
Hardware: Manifold2-C/G
|
|
Serial: USB-to-Serial Controller CP210x
|
|
C Compiler: GCC version 5.4.0 20160609
|
|
CMake Version: Cmake version 3.5.1
|
|
IDE: CLion 2020.3.1
|
|
|
|
Communication Serial Configuration:
|
|
Baud Rate: 460800
|
|
|
|
Network Port Configuration:
|
|
IP Address: Auto Config (Need root permission)
|
|
Network Port: Auto Config
|
|
NetMask: Auto Config
|
|
Gateway: Auto Config
|
|
|
|
====== The steps to run the Payload SDK linux sample ======
|
|
Step 1 : modify related device information, such as device name of network or uart, uart baud rate.
|
|
|
|
Step 2 : fill in your app info to file with path 'sample/platform/linux/manifold2/application/app_info.h'.
|
|
This info can be obtained by logging in to the developer website https://developer.dji.com/payload-sdk.
|
|
|
|
Step 3 : build source file, use following cmd:
|
|
cd source_code_dir/project
|
|
mkdir build
|
|
cd build
|
|
cmake ..
|
|
make
|
|
|
|
Step 4 : Manifold should connect to Skyport 2.0/XPort via usb-to-serial controller and network cable, make sure the
|
|
serial pins are connected properly.
|
|
|
|
Step 5 : use the root permission to execute this program, use following cmd:
|
|
sudo ./psdk_demo
|
|
|
|
Step 6: open DJI Pilot APP/MSDK APP to use the payload demo functions. |