第一次提交
This commit is contained in:
629
PSDK/psdk_lib/include/dji_flight_controller.h
Normal file
629
PSDK/psdk_lib/include/dji_flight_controller.h
Normal file
@ -0,0 +1,629 @@
|
||||
/**
|
||||
********************************************************************
|
||||
* @file dji_flight_controller.h
|
||||
* @brief This is the header file for "dji_flight_controller.c", defining the structure and
|
||||
* (exported) function prototypes.
|
||||
*
|
||||
* @copyright (c) 2021 DJI. All rights reserved.
|
||||
*
|
||||
* All information contained herein is, and remains, the property of DJI.
|
||||
* The intellectual and technical concepts contained herein are proprietary
|
||||
* to DJI and may be covered by U.S. and foreign patents, patents in process,
|
||||
* and protected by trade secret or copyright law. Dissemination of this
|
||||
* information, including but not limited to data and other proprietary
|
||||
* material(s) incorporated within the information, in any form, is strictly
|
||||
* prohibited without the express written consent of DJI.
|
||||
*
|
||||
* If you receive this source code without DJI’s authorization, you may not
|
||||
* further disseminate the information, and you must immediately remove the
|
||||
* source code and notify DJI of its removal. DJI reserves the right to pursue
|
||||
* legal actions against you for any loss(es) or damage(s) caused by your
|
||||
* failure to do so.
|
||||
*
|
||||
*********************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef DJI_FLIGHT_CONTROLLER_H
|
||||
#define DJI_FLIGHT_CONTROLLER_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "dji_typedef.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#define EMERGENCY_STOP_MOTOR_MSG_MAX_LENGTH 10 /*!< Max length of emergency stop motor message. */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef uint16_t E_DjiFlightControllerGoHomeAltitude; /*!< Unit:meter, range 20~500 */
|
||||
|
||||
/**
|
||||
* @brief The UAV's actions when rc is lost.
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_RC_LOST_ACTION_HOVER = 0, /*!< Aircraft will execute hover cation when rc is lost. */
|
||||
DJI_FLIGHT_CONTROLLER_RC_LOST_ACTION_LANDING = 1, /*!< Aircraft will execute land cation when rc is lost. */
|
||||
DJI_FLIGHT_CONTROLLER_RC_LOST_ACTION_GOHOME = 2, /*!< Aircraft will execute go-home cation when rc is lost. */
|
||||
} E_DjiFlightControllerRCLostAction;
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable RTK position enum
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_DISABLE_RTK_POSITION = 0, /*!< 0: The UAV will use GPS data instead of RTK data to execute
|
||||
* actions which require location information(waypoint、go home...)
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_ENABLE_RTK_POSITION = 1, /*!< 1:The UAV will use RTK data instead of GPS data to execute
|
||||
* actions which require location information(waypoint、go home...)*/
|
||||
} E_DjiFlightControllerRtkPositionEnableStatus;
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable obstacle avoidance enum
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_DISABLE_OBSTACLE_AVOIDANCE = 0, /*!< 0: The UAV will not perform obstacle avoidance in
|
||||
* the specified direction */
|
||||
DJI_FLIGHT_CONTROLLER_ENABLE_OBSTACLE_AVOIDANCE = 1, /*!< 0: The UAV will perform obstacle avoidance in the
|
||||
* specified direction */
|
||||
} E_DjiFlightControllerObstacleAvoidanceEnableStatus;
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable emergency stop motor function enum
|
||||
* @note Attention:Enable emergency-stop-motor function is very dangerous in the air.it will make the aircraft crash!!!
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_ENABLE_EMERGENCY_STOP_MOTOR = 0x01, /*!< Execute emergency-stop-motor action */
|
||||
DJI_FLIGHT_CONTROLLER_DISABLE_EMERGENCY_STOP_MOTOR = 0x02 /*!< Cancel emergency-stop-motor status */
|
||||
} E_DjiFlightControllerEmergencyStopMotor;
|
||||
|
||||
/**
|
||||
* @brief Obtain/Release joystick control authority command enum
|
||||
* @note You have obtain joystick control authority successfully before using joystick.
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_RELEASE_JOYSTICK_CTRL_AUTHORITY = 0, /*!< Obtain joystick authority */
|
||||
DJI_FLIGHT_CONTROLLER_OBTAIN_JOYSTICK_CTRL_AUTHORITY = 1, /*!< Release joystick authority */
|
||||
} E_DjiFlightControllerJoystickCtrlAuthorityAction;
|
||||
|
||||
/**
|
||||
* @brief The UAV's joystick control authority owner enum
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_JOYSTICK_CTRL_AUTHORITY_RC = 0, /*!< Rc could control UAV with joystick. */
|
||||
DJI_FLIGHT_CONTROLLER_JOYSTICK_CTRL_AUTHORITY_MSDK = 1, /*!< MSDK could control UAV with joystick. */
|
||||
DJI_FLIGHT_CONTROLLER_JOYSTICK_CTRL_AUTHORITY_INTERNAL = 2, /*!< Special Internal modules could control UAV
|
||||
* with joystick. */
|
||||
DJI_FLIGHT_CONTROLLER_JOYSTICK_CTRL_AUTHORITY_OSDK = 4, /*!< OSDK could control UAV with joystick. */
|
||||
} E_DjiFlightControllerJoystickCtrlAuthority;
|
||||
|
||||
/**
|
||||
* @brief The UAV's joystick control authority switch reason enum
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_MSDK_GET_JOYSTICK_CTRL_AUTH_EVENT = 1, /*!< MSDK get joystick control authority. */
|
||||
DJI_FLIGHT_CONTROLLER_INTERNAL_GET_JOYSTICK_CTRL_AUTH_EVENT = 2, /*!< Special Internal modules get joystick control authority. */
|
||||
DJI_FLIGHT_CONTROLLER_OSDK_GET_JOYSTICK_CTRL_AUTH_EVENT = 3, /*!< OSDK get joystick control authority. */
|
||||
DJI_FLIGHT_CONTROLLER_RC_LOST_GET_JOYSTICK_CTRL_AUTH_EVENT = 4, /*!< Reset joystick control authority to rc when executing rc lost action */
|
||||
DJI_FLIGHT_CONTROLLER_RC_NOT_P_MODE_RESET_JOYSTICK_CTRL_AUTH_EVENT = 5, /*!< Reset joystick control authority to rc when rc is not in P mode */
|
||||
DJI_FLIGHT_CONTROLLER_RC_SWITCH_MODE_GET_JOYSTICK_CTRL_AUTH_EVENT = 6, /*!< Set joystick control authority to rc when rc switch control mode(T/APS) */
|
||||
DJI_FLIGHT_CONTROLLER_RC_PAUSE_GET_JOYSTICK_CTRL_AUTH_EVENT = 7, /*!< Reset joystick control authority to rc when rc pausing */
|
||||
DJI_FLIGHT_CONTROLLER_RC_REQUEST_GO_HOME_GET_JOYSTICK_CTRL_AUTH_EVENT = 8, /*!< Reset joystick control authority to rc when rc requesting go home*/
|
||||
DJI_FLIGHT_CONTROLLER_LOW_BATTERY_GO_HOME_RESET_JOYSTICK_CTRL_AUTH_EVENT = 9, /*!< Reset joystick control authority to rc when aircraft is executing low-battery-go-home*/
|
||||
DJI_FLIGHT_CONTROLLER_LOW_BATTERY_LANDING_RESET_JOYSTICK_CTRL_AUTH_EVENT = 10, /*!< Reset joystick control authority to rc when aircraft is executing low-battery-landing*/
|
||||
DJI_FLIGHT_CONTROLLER_OSDK_LOST_GET_JOYSTICK_CTRL_AUTH_EVENT = 11, /*!< Reset joystick control authority to rc when osdk is lost*/
|
||||
DJI_FLIGHT_CONTROLLER_NERA_FLIGHT_BOUNDARY_RESET_JOYSTICK_CTRL_AUTH_EVENT = 12, /*!< Reset joystick control authority to rc when aircraft is near boundary.*/
|
||||
} E_DjiFlightControllerJoystickCtrlAuthoritySwitchEvent;
|
||||
|
||||
/**
|
||||
* @brief The UAV's joystick control authority switch event info enum
|
||||
*/
|
||||
typedef struct {
|
||||
E_DjiFlightControllerJoystickCtrlAuthority curJoystickCtrlAuthority; /*!< The UAV's joystick control authority owner */
|
||||
E_DjiFlightControllerJoystickCtrlAuthoritySwitchEvent joystickCtrlAuthoritySwitchEvent; /*!< The UAV's joystick control authority switch reason */
|
||||
} T_DjiFlightControllerJoystickCtrlAuthorityEventInfo;
|
||||
|
||||
/**
|
||||
* @brief Prototype of callback function used to get joystick control authority switch event info.
|
||||
* @return Execution result.
|
||||
*/
|
||||
typedef T_DjiReturnCode (*JoystickCtrlAuthorityEventCbFunc)(
|
||||
T_DjiFlightControllerJoystickCtrlAuthorityEventInfo eventData);
|
||||
|
||||
/**
|
||||
* @brief Horizon control mode in joystick mode enum
|
||||
* @note Only when the GPS signal is good (health_flag >=3)，horizontal position control (DJI_FLIGHT_CONTROLLER_HORIZONTAL_POSITION_CONTROL_MODE)
|
||||
* related control modes can be used. only when GPS signal is good (health_flag >=3)，or when advanced sensing system is working properly with Autopilot，
|
||||
* horizontal velocity control（DJI_FLIGHT_CONTROLLER_HORIZONTAL_VELOCITY_CONTROL_MODE) related control modes can be used.
|
||||
*/
|
||||
typedef enum {
|
||||
/**
|
||||
* @brief Control pitch & roll & angle of the aircraft.
|
||||
* @note Need to be referenced to either the ground or body frame by E_DjiFlightControllerHorizontalCoordinate setting.
|
||||
* Limit: -35 degree to 35 degree
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_ANGLE_CONTROL_MODE = 0,
|
||||
/**
|
||||
* @brief Set the control-mode to control horizontal vehicle velocities.
|
||||
* @note Need to be referenced to either the ground or body frame by E_DjiFlightControllerHorizontalCoordinate setting
|
||||
* Limit: -30m/s to 30 m/s
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_VELOCITY_CONTROL_MODE = 1,
|
||||
/**
|
||||
* @brief Set the control-mode to control position offsets of pitch & roll directions.
|
||||
* @note Need to be referenced to either the ground or body frame by E_DjiFlightControllerHorizontalCoordinate setting
|
||||
* Limit: N/A
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_POSITION_CONTROL_MODE = 2,
|
||||
/**
|
||||
* @brief Set the control-mode to control rate of change of the vehicle's attitude.
|
||||
* @note Need to be referenced to either the ground or body frame by E_DjiFlightControllerHorizontalCoordinate setting
|
||||
* Limit: -150deg/s to 150.0 deg/s
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_ANGULAR_RATE_CONTROL_MODE = 3
|
||||
} E_DjiFlightControllerHorizontalControlMode;
|
||||
|
||||
/**
|
||||
* @brief Vertical control mode in joystick mode enum
|
||||
* @note We suggest developers do not use VERTICAL_POSITION control mode indoor when your UAV flight height is larger than 3 meters.
|
||||
* This is because in indoor environments, barometer can be inaccurate, and the vertical controller may fail to keep
|
||||
* the height of the UAV.
|
||||
*/
|
||||
typedef enum {
|
||||
/**
|
||||
* @brief Set the control-mode to control the vertical speed of UAV, upward is positive/
|
||||
* @note Limit: -5m/s to 5 m/s
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_VERTICAL_VELOCITY_CONTROL_MODE = 0,
|
||||
|
||||
/**
|
||||
* @brief Set the control-mode to control the height of UAV
|
||||
* @note Limit: 0m to 120 m
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_VERTICAL_POSITION_CONTROL_MODE = 1,
|
||||
|
||||
/**
|
||||
* @brief Set the control-mode to directly control the thrust
|
||||
* @note Range: 0% to 100%
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_VERTICAL_THRUST_CONTROL_MODE = 2,
|
||||
} E_DjiFlightControllerVerticalControlMode;
|
||||
|
||||
/**
|
||||
* @brief Yaw control mode in joystick mode enum
|
||||
*/
|
||||
typedef enum {
|
||||
/**
|
||||
* @brief Set the control-mode to control yaw angle.
|
||||
* @note Yaw angle is referenced to the ground frame.In this control mode, Ground frame is enforced in Autopilot.
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_YAW_ANGLE_CONTROL_MODE = 0x00,
|
||||
|
||||
/**
|
||||
* @brief Set the control-mode to control yaw angular velocity
|
||||
* @note Same reference frame as YAW_ANGLE.
|
||||
* Limit: -150deg/s to 150 deg/s
|
||||
*/
|
||||
DJI_FLIGHT_CONTROLLER_YAW_ANGLE_RATE_CONTROL_MODE = 1
|
||||
} E_DjiFlightControllerYawControlMode;
|
||||
|
||||
/**
|
||||
* @brief Horizontal coordinate in joystick mode enum
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_GROUND_COORDINATE = 0, /*!< Set the x-y of ground frame as the horizontal frame (NEU) */
|
||||
DJI_FLIGHT_CONTROLLER_HORIZONTAL_BODY_COORDINATE = 1 /*!< Set the x-y of body frame as the horizontal frame (FRU) */
|
||||
} E_DjiFlightControllerHorizontalCoordinate;
|
||||
|
||||
/*!
|
||||
* @brief Stable mode in joystick mode enum.
|
||||
* @note Only works in Horizontal velocity control mode.In velocity stable mode, drone will brake and hover at one position once
|
||||
* the input command is zero.In velocity non-stable mode, drone will follow the velocity command and not hover when the command is zero.
|
||||
* That means drone will drift with the wind.
|
||||
*/
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_STABLE_CONTROL_MODE_DISABLE = 0, /*!< Disable the stable mode */
|
||||
DJI_FLIGHT_CONTROLLER_STABLE_CONTROL_MODE_ENABLE = 1 /*!< Enable the stable mode */
|
||||
} E_DjiFlightControllerStableControlMode;
|
||||
|
||||
typedef enum {
|
||||
DJI_FLIGHT_CONTROLLER_ENABLE_RC_LOST_ACTION = 0,
|
||||
DJI_FLIGHT_CONTROLLER_DISABLE_RC_LOST_ACTION = 1,
|
||||
} E_DjiFlightControllerRCLostActionEnableStatus;
|
||||
|
||||
/**
|
||||
* @brief Joystick mode.
|
||||
* @note You need to set joystick mode first before start to send joystick command to aircraft.
|
||||
*/
|
||||
typedef struct {
|
||||
E_DjiFlightControllerHorizontalControlMode horizontalControlMode; /*!< See reference of E_DjiFlightControllerHorizontalControlMode*/
|
||||
E_DjiFlightControllerVerticalControlMode verticalControlMode; /*!< See reference of E_DjiFlightControllerVerticalControlMode*/
|
||||
E_DjiFlightControllerYawControlMode yawControlMode; /*!< See reference of E_DjiFlightControllerYawControlMode*/
|
||||
E_DjiFlightControllerHorizontalCoordinate horizontalCoordinate; /*!< See reference of E_DjiFlightControllerHorizontalCoordinate*/
|
||||
E_DjiFlightControllerStableControlMode stableControlMode; /*!< See reference of E_DjiFlightControllerStableControlMode*/
|
||||
} T_DjiFlightControllerJoystickMode;
|
||||
|
||||
#pragma pack(1)
|
||||
typedef struct {
|
||||
dji_f32_t x; /*!< Control with respect to the x axis.*/
|
||||
dji_f32_t y; /*!< Control with respect to the y axis.*/
|
||||
dji_f32_t z; /*!< Control with respect to the z axis, up is positive. */
|
||||
dji_f32_t yaw; /*!< Yaw position/velocity control w.r.t. the ground frame.*/
|
||||
} T_DjiFlightControllerJoystickCommand;// pack(1)
|
||||
|
||||
typedef struct {
|
||||
dji_f64_t latitude; /*!< unit: rad */
|
||||
dji_f64_t longitude; /*!< unit: rad */
|
||||
} T_DjiFlightControllerHomeLocation; // pack(1)
|
||||
|
||||
typedef struct {
|
||||
char serialNum[32];
|
||||
} T_DjiFlightControllerGeneralInfo;
|
||||
#pragma pack()
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Initialise flight controller module, and user should call this function
|
||||
* before using flight controller features.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_Init(void);
|
||||
|
||||
/**
|
||||
* @brief DeInitialise flight controller module.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_Deinit(void);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable RTK position function.
|
||||
* @details Enabling RTK means that RTK data will be used instead of GPS during flight.
|
||||
* @param rtkEnableStatus: see reference of "E_DjiFlightControllerRtkPositionEnableStatus".
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode
|
||||
DjiFlightController_SetRtkPositionEnableStatus(E_DjiFlightControllerRtkPositionEnableStatus rtkEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get RTK enable status.
|
||||
* @note Enabling RTK means that RTK data will be used during intelligent flight.
|
||||
* @param rtkEnableStatus: see reference of "E_DjiFlightControllerRtkPositionEnableStatus".
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode
|
||||
DjiFlightController_GetRtkPositionEnableStatus(E_DjiFlightControllerRtkPositionEnableStatus *rtkEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Set rc lost action.
|
||||
* @note It will be valid when rc and osdk is both lost.It only support M30.
|
||||
* @param rcLostAction: actions when rc is lost.(hover/landing/go home).It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetRCLostAction(E_DjiFlightControllerRCLostAction rcLostAction);
|
||||
|
||||
/**
|
||||
* @brief Get rc lost action(hover/landing/gohome).
|
||||
* @note It will be valid when rc and osdk is both lost.It only support M30.
|
||||
* @param rcLostAction: see reference of E_DjiFlightControllerRCLostAction.It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetRCLostAction(E_DjiFlightControllerRCLostAction *rcLostAction);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable horizontal visual(forwards,backwards,left,right) obstacle avoidance.
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param horizontalObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetHorizontalVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus horizontalObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get status of horizontal visual(forwards,backwards,left,right) obstacle avoidance switch.
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param horizontalObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetHorizontalVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus *horizontalObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable horizontal radar obstacle avoidance.
|
||||
* @note It will be valid only if you install CSM radar successfully.For detailed parameters of obstacle avoidance,
|
||||
* it is recommended to read the official user manual in https://www.dji.com/uk/matrice-300/downloads.
|
||||
* @param horizontalObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetHorizontalRadarObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus horizontalObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get status of horizontal radar obstacle avoidance switch.
|
||||
* @note It will be valid only if you install CSM radar successfully.For detailed parameters of obstacle avoidance,
|
||||
* it is recommended to read the official user manual in https://www.dji.com/uk/matrice-300/downloads.
|
||||
* @param horizontalObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetHorizontalRadarObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus *horizontalObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable upwards visual obstacle avoidance.
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param upwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetUpwardsVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus upwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get status of upwards visual obstacle avoidance switch.
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param upwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetUpwardsVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus *upwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable upwards radar obstacle avoidance.
|
||||
* @note It will be valid only if you install CSM radar successfully.For detailed parameters of obstacle avoidance,
|
||||
* it is recommended to read the official user manual in https://www.dji.com.
|
||||
* @param upwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetUpwardsRadarObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus upwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get status of upwards radar obstacle avoidance switch
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param upwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetUpwardsRadarObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus *upwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable downwards visual obstacle avoidance
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param downwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetDownwardsVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus downwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Get status of downwards visual obstacle avoidance switch
|
||||
* @note For detailed parameters of obstacle avoidance, it is recommended to read the official user manual in
|
||||
* https://www.dji.com.
|
||||
* @param downwardsObstacleAvoidanceEnableStatus: see reference of E_DjiFlightControllerObstacleAvoidanceEnableStatus.
|
||||
* It keeps in sync with pilot's param.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetDownwardsVisualObstacleAvoidanceEnableStatus(
|
||||
E_DjiFlightControllerObstacleAvoidanceEnableStatus *downwardsObstacleAvoidanceEnableStatus);
|
||||
|
||||
/**
|
||||
* @brief Arrest flying.
|
||||
* @note when the UAV is on the ground ,it will stop motors and display "hms description" on APP. when the UAV is
|
||||
* in the air, it will continue flying and display "hms description" on APP only.
|
||||
* If you use this interface, you need to use "DjiFlightController_CancelArrestFlying" to quit arrest-flying status, then
|
||||
* then the UAV can fly again.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_ArrestFlying(void);
|
||||
|
||||
/**
|
||||
* @brief Quit status of arrest-flying.
|
||||
* @note The UAV need to quit status of arrest-flying to continue flying after arresting flying.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_CancelArrestFlying(void);
|
||||
|
||||
/**
|
||||
* @brief Turn on motors when the UAV is on the ground.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_TurnOnMotors(void);
|
||||
|
||||
/**
|
||||
* @brief Turn off motors when the UAV is on the ground.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_TurnOffMotors(void);
|
||||
|
||||
/**
|
||||
* @brief Emergency stop motor in any case.
|
||||
* @note If you want to turn on motor after emergency stopping motor, you need to use the interface to send disable
|
||||
* command to quit lock-motor status.
|
||||
* @param cmd: see reference of E_DjiFlightControllerEmergencyStopMotor
|
||||
* @param debugMsg:inject debug message to flight control FW for logging, size limit: 10 bytes
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_EmergencyStopMotor(E_DjiFlightControllerEmergencyStopMotor cmd,
|
||||
char debugMsg[EMERGENCY_STOP_MOTOR_MSG_MAX_LENGTH]);
|
||||
/**
|
||||
* @brief Request take off action when the UAV is on the ground.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_StartTakeoff(void);
|
||||
|
||||
/**
|
||||
* @brief Request landing action when the UAV is in the air.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_StartLanding(void);
|
||||
|
||||
/**
|
||||
* @brief Request cancel landing action when the UAV is landing
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_CancelLanding(void);
|
||||
|
||||
/**
|
||||
* @brief Confirm the landing when the UAV is 0.7m above the ground.
|
||||
* @note When the clearance between the aircraft and the ground is less than 0.7m, the aircraft will pause landing and
|
||||
* wait for user's confirmation.This api use for confirm landing. If the ground is not suitable for landing ,user must
|
||||
* use RC to control it landing manually or force landing.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_StartConfirmLanding(void);
|
||||
|
||||
/**
|
||||
* @brief Force landing in any case.
|
||||
* @note This api will ignore the smart landing function,.When using this pi, it will landing directly (would not stop
|
||||
* at 0.7m and wait user's command). Attention:it may make the aircraft crash!!!
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_StartForceLanding(void);
|
||||
|
||||
/**
|
||||
* @brief Set customized GPS(not RTK) home location.
|
||||
* @note Set customized home location failed reason may as follows:
|
||||
* 1. The distance between new home location and last home location is larger than MAX_FLY_RADIUS(20km).
|
||||
* 2. Record initial home location failed after start aircraft.
|
||||
* @param homeLocation: homeLocation include latitude and longitude
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetHomeLocationUsingGPSCoordinates(T_DjiFlightControllerHomeLocation homeLocation);
|
||||
|
||||
/**
|
||||
* @brief Set home location using current aircraft GPS(not RTK) location.
|
||||
* @note Set home location failed reasons may as follows:
|
||||
* 1. Aircraft's gps level can't reach the condition of recording home location.
|
||||
* 2. Record initial home location failed after start aircraft.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetHomeLocationUsingCurrentAircraftLocation(void);
|
||||
|
||||
/**
|
||||
* @brief Set go home altitude.
|
||||
* @note If aircraft's current altitude is higher than the setting value of go home altitude, aircraft will go home
|
||||
* using current altitude. Otherwise, it will climb to setting of go home altitude ,and then execute go home action.
|
||||
* Go home altitude setting is 20m ~ 500m.
|
||||
* @param altitude: go home altitude, unit: meter
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_SetGoHomeAltitude(E_DjiFlightControllerGoHomeAltitude altitude);
|
||||
|
||||
/**
|
||||
* @brief Get go home altitude.
|
||||
* @param altitude: go home altitude, unit: meter
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetGoHomeAltitude(E_DjiFlightControllerGoHomeAltitude *altitude);
|
||||
|
||||
/**
|
||||
* @brief Request go home action when the UAV is in the air
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_StartGoHome(void);
|
||||
|
||||
/**
|
||||
* @brief Request cancel go home action when the UAV is going home
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_CancelGoHome(void);
|
||||
|
||||
/**
|
||||
* @brief Obtain UAV's joystick control authority.
|
||||
* @note 1.You have to obtain joystick control authority successfully before you using joystick to control UAV.
|
||||
* 2. RC must be in p-mode.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_ObtainJoystickCtrlAuthority(void);
|
||||
|
||||
/**
|
||||
* @brief Release UAV's joystick control authority.
|
||||
* @note RC must be in p-mode.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_ReleaseJoystickCtrlAuthority(void);
|
||||
|
||||
/**
|
||||
* @brief Subscribe to joystick control authority switch event with a callback function.
|
||||
* @note it will be triggered once the joystick control authority switch event occurs.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_RegJoystickCtrlAuthorityEventCallback(JoystickCtrlAuthorityEventCbFunc callback);
|
||||
|
||||
/**
|
||||
* @brief Set expected joystick mode before requesting joystick.
|
||||
* @param joystickMode: include horizontal/vertical/yaw control mode, stable control mode.
|
||||
*/
|
||||
void DjiFlightController_SetJoystickMode(T_DjiFlightControllerJoystickMode joystickMode);
|
||||
|
||||
/**
|
||||
* @brief Request execute joystick action.
|
||||
* @param joystickCommand: include x/y/z/yaw.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_ExecuteJoystickAction(T_DjiFlightControllerJoystickCommand joystickCommand);
|
||||
|
||||
/**
|
||||
* @brief Request emergency brake action.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_ExecuteEmergencyBrakeAction(void);
|
||||
|
||||
/**
|
||||
* @brief Request cancel emergency brake action.
|
||||
* @note It is only support on M30.If you use DjiFlightController_ExecuteEmergencyBrakeAction(), you need to use
|
||||
* "DjiFlightController_CancelEmergencyBrakeAction()" to allow aircraft to execute drone action again.
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_CancelEmergencyBrakeAction(void);
|
||||
|
||||
/**
|
||||
* @brief Get general info of the aircraft.
|
||||
* @param generalInfo: the struct stored the serial num which contains a array of chars var in case the user gives an
|
||||
* illegal length character pointer
|
||||
* @return Execution result.
|
||||
*/
|
||||
T_DjiReturnCode DjiFlightController_GetGeneralInfo(T_DjiFlightControllerGeneralInfo *generalInfo);
|
||||
|
||||
/*! @brief The command decides whether execute RC lost action or not when osdk is running
|
||||
* @note This setting only affects the behavior of the drone when the RC lost and the OSDK is connected.
|
||||
* if the command is enable, the drone will not execute rc lost action when rc is lost but OSDK is running;
|
||||
* if the command is disable, the drone will execute rc lost action when rc is lost but OSDK is running
|
||||
* the drone will execute rc lost action when rc is lost and OSDK is lost whatever the command is.
|
||||
* default command is disable.
|
||||
* @param executeRCLostActionOrNotWhenOnboardOn enable:1;disable:0
|
||||
* @return T_DjiReturnCode error code
|
||||
*/
|
||||
T_DjiReturnCode
|
||||
DjiFlightController_SetRCLostActionEnableStatus(E_DjiFlightControllerRCLostActionEnableStatus command);
|
||||
|
||||
/*! @brief get rc lost action enable status(enable or disable)
|
||||
* @param command executeRCLostActionOrNotWhenOnboardOn, enable:1;disable:0
|
||||
* @return T_DjiReturnCode error code
|
||||
*/
|
||||
T_DjiReturnCode
|
||||
DjiFlightController_GetEnableRCLostActionStatus(E_DjiFlightControllerRCLostActionEnableStatus *command);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // DJI_FLIGHT_CONTROLLER_H
|
||||
/************************ (C) COPYRIGHT DJI Innovations *******END OF FILE******/
|
||||
Reference in New Issue
Block a user